PV3907 紡織品刷磨耗試驗
1范圍:該測試規范描述了用于測試樣品和系列監測測試的紡織品的刷磨損的程序。
2要求:根據圖紙和/或TL標準
測試過程
測試儀器:旋轉磨機(Frank)
樣品尺寸:100cm2
磨損區域:約50cm2
樣品曲率:10mm
負載:10N
轉數:1000
刷毛高度:16.4mm
刷毛厚度:0.4mm
每束刷毛:48±2
把柄:90x120mm
捆綁間距:8mm
刷毛材料:PA6
行:11
在每1000次旋轉之后,刷子應使用壓縮空氣清潔雜質。
3.1刷子的供應來源
Kullen Gmbh&Co
Am Heibrunnen83
72766 Reutlingen
Telephone +49 (0)7121 142-0
F +49 (0)7121 142-260
ABRASION TESTER (Design SCHOPPER)
This apparatus evaluates and measures resistance to wear and tear on varieties of textile materials
(woven and knitted fabrics, etc.) according to DIN 53863, Part 2, GME Standard 60345, GMW Standard 3283 and
VW/Audi Zentral-Norm PV 3908.
The ABRASION TESTER described as follows guarantees a testing method that gives the possibility of determining reliably the resistance to wear and tear. This method consists in that the different sectors of a circular sample of the material to be tested, are successively and intermittently, put into contact with and moved across a loaded abrading face, whereby the sample surface is worn by the abrader. The rotary
movement of the test specimen is arranged at definite intervals, so that the sample is tested in two directions.
The clamping head allows of clamping reliably even very thick samples and moreover is so arranged that, by using under similar initial tension. This is of essential importance as the test result depends upon the stretch of the sample. For fixing the sample the clamping head can be taken off the machine and inserted into a special ringspanner which facilitates this operation. The abrader head is balanced by a counterweight. The compression effect for the abrading operation is produced by placing loading weights on the abrader head. Siliciumcarbid-emery paper has proved to be a very convenient abrasive. For fastening, the strip of emery paper is used for
each test in order that the testing conditions may be uniform.
Technical specification acc. to DIN 53 863: | |
Test surface: | 50 cm2 |
Emery paper: | Siliciumcarbid (1 sheet of paper for each test) |
Compression effect: | by placing loading weights on the abrader head |
Weight/m2 of the sample up to 100 | 1.0 N |
100 to 150 | 2.0 N |
150 to 300 | 5.0 N |
above 300 | 10.0 N |
Connection: | electric 3-phase A.D. motor, 220/380 V, 50 cps. |
Dimension: | 550x600x600 mm |
Weight: | net 60 kg, gross about 90 kg |
相關產品
免責聲明
- 凡本網注明“來源:化工儀器網”的所有作品,均為浙江興旺寶明通網絡有限公司-化工儀器網合法擁有版權或有權使用的作品,未經本網授權不得轉載、摘編或利用其它方式使用上述作品。已經本網授權使用作品的,應在授權范圍內使用,并注明“來源:化工儀器網”。違反上述聲明者,本網將追究其相關法律責任。
- 本網轉載并注明自其他來源(非化工儀器網)的作品,目的在于傳遞更多信息,并不代表本網贊同其觀點和對其真實性負責,不承擔此類作品侵權行為的直接責任及連帶責任。其他媒體、網站或個人從本網轉載時,必須保留本網注明的作品第一來源,并自負版權等法律責任。
- 如涉及作品內容、版權等問題,請在作品發表之日起一周內與本網聯系,否則視為放棄相關權利。