產品分類品牌分類
-
聚碳酸酯微孔濾膜 混合纖維素酯微孔濾膜 尼龍微孔濾膜/聚碳酸酯膜/混合纖維素酯膜/聚醚砜膜 一次性針頭過濾器 培養液瓶 培養皿 漏斗 燒杯 過濾器材 離心管 稱量紙及消毒籃 血清板/發光板/酶標板 PCR管/PCR板 不銹鋼試管架/培養皿架 移液器吸頭 廣口瓶/窄口瓶/滴瓶/放水口大瓶 可熔性聚四氟乙烯(PFA)類產品 聚四氟乙烯(PTFE)類產品 聚全氟乙丙烯(FEP)類產品 石英漏斗/石英燒杯/石英蒸發皿/培養皿 滅菌包裝袋 程序降溫盒,冰盒 不銹鋼分樣篩/銅沖框標準篩
產品簡介
詳細介紹
Products Introduction:
SG-3036 Combined electric mixer with mechanical timer, with increased power capabilities, speed and stability, continuously adjustable, noise, six motor agitation, automatically lifting;SG-3036A-S-type with a speed of digital features, intuitive reading reliable, convenient and precise control of mixing conditions;Clock cycle time setting; bottom seat belt light .According to the experimental requirements can be different speeds, and is equipped with lighting. Stirring rod made of stainless steel, increased corrosion resistance,Stirring rod made of stainless steel, increased corrosion resistance.Powerful mixer for high viscosity samples.
Features:
The company combines domestic and foreign similar products and user experience,Carefully design and development of a new generation mixer products,Compared with similar products with higher quality advantage:
1.Independent operation mode and asynchronous operation modes: 6 stirring rods were running their own program, that blender can run 6 group can run the same program 6 different programs.
2.Stirring shaft with accurate and reliable high-quality motor drive, speed and high accuracy, speed through the reliable control, no accumulation of error.
3.Stirring bar automatic lifting system enables the process of mixing bodies by mixing programmed to do a small lift to achieve the best mixing effect.
4.Beaker base, lower cabinet with lighting, to observe the mixing effect.
5.Stirring rod and stirring blades made of stainless steel, corrosion-resistant, rod length and leaf size of scientific and rational, static and dynamic under the direction of the blade is always consistent, so that guaranteed mixing effects.
6.Reasonable lift system design, to avoid stirring rod and the blade in the upgrading process of decline and mixing of the liquid quality of lubricating oil.
7.Optimized chassis design using the golden section theory, mechanical drive closed on cabinets, compact structure, elegant appearance.
8.Load can be more than 10,000 hours continuous operation
Product Type | power source | Motor Power | Speed range | Timing range |
SG-3036 | 50HZ 、 220V+10% | 140W (synchronous) 6 × 30W (asynchronous) | 0-1200 r / min (simultaneous) 0-3000 r / min (asynchronous) Speed without digital display functions | 0-120 min |
SG-3036-S | 50HZ 、 220V+10% | 140W (synchronous)6 × 30W (asynchronous) | 0-1200 r / min (simultaneous) 0-3000 r / min (asynchronous) Speed digital, direct and reliable | 0-120 min |