目錄:四川梓冠光電科技有限公司>>調制器>>聲光調制器>> 梓冠1064nm聲光調制器
應用領域 | 生物產業,能源,電子,電氣,綜合 |
---|
光纖耦合聲光調制器/Fiber-AOM/Fiber-Q
Model:ZG-FCAOM-1550-M100-PM
Specification:
Parameter | Min | Max | Typical | Comments |
Interaction material | Tellurium Dioxide | |||
Wavelength | 1530 nm | 1565 nm | 1550 nm | Other wavelengths available on request |
Average optical power handling | 0.5 W | |||
Insertion loss | 2.5 dB | 2 dB | ||
Polarization extinction ratio | 18 | |||
Extinction ratio | 50 dB | |||
Return loss(RF ON/RF OFF) | 40 dB | |||
Rise-time/fall-time(10%-90%) | 50 ns | |||
Frequency | 100 MHz | |||
VSWR | 1.3:1 | |||
Input impedance | 50 Ω | |||
RF power | 3.0W | 2.5 W | Higher RF power will cause damage | |
RF connector | SMA | |||
Frequency shift | +100MHz | Upshift | ||
Fiber type | PM1550 | |||
Fiber length | 1.0m | 900um loose tube | ||
Fiber termination | FC/APC |
聲光調制是一種外調制技術,通常把控制激光束強度變化的聲光器件稱作聲光調制器。聲光調制技術比光源的直接調制技術有高得多的調制頻率;與電光調制技術相比,它有更高的消光比(一般大于1000:1),更低的驅動功率,更優良的溫度穩定性和更好的光點質量以及低的價格;與機械調制方式相比,它有更小的體積、重量和更好的輸出波形。 其工作原理簡述如下:
聲光調制器由聲光介質和壓電換能器構成。當驅動源的某種特定載波頻率驅動換能器時,換能器即產生同一頻率的超聲波并傳入聲光介質,在介質內形成折射率變化,光束通過介質時即發生相互作用而改變光的傳播方向即產生衍射 聲光調制器AOM
1064nm聲光調制器
(空格分隔,最多3個,單個標簽最多10個字符)