性猛交XXXX乱大交派对,四虎影视WWW在线观看免费 ,137最大但人文艺术摄影,联系附近成熟妇女

產品展廳收藏該商鋪

您好 登錄 注冊

當前位置:
世聯博研(北京)科技有限公司>>現貨>>納米圖案灌流培養皿*

納米圖案灌流培養皿*

返回列表頁
  • 納米圖案灌流培養皿*

  • 納米圖案灌流培養皿*

  • 納米圖案灌流培養皿*

  • 納米圖案灌流培養皿*

  • 納米圖案灌流培養皿*

收藏
舉報
參考價 面議
具體成交價以合同協議為準
  • 型號
  • 品牌 其他品牌
  • 廠商性質 經銷商
  • 所在地 合肥市

在線詢價 收藏產品 加入對比 查看聯系電話

更新時間:2023-12-18 09:12:53瀏覽次數:300

聯系我們時請說明是化工儀器網上看到的信息,謝謝!

產品簡介

產地類別 進口 應用領域 環保
納米圖案灌流培養皿*,該細胞組織可拉伸微電極陣列刺激與成像記錄系統使研究人員能夠可重復且可靠地研究生理和病理機械拉伸對生物組織電生理的影響。該系統集成:細胞拉伸設備,電生理數據采集系統;活細胞成像系統三種功能...

詳細介紹

納米圖案灌流培養皿*

納米圖案灌流培養皿,

品牌:法國 以及美國flexcell

銷售歐美進口各種不同基底靜態培養及不同基底力學刺激環境動態培養裝置
一、法國基底剛度可調控微圖案培養產品

特點:

控制細胞的3D結構和力學

細胞在平坦或微結構化的軟3D環境中培養,以模仿體內條件。

基材的剛度可以從非常軟(1 kPa)到非常硬(200 kPa)中選擇

提供多種基材形貌(平坦,圓形孔,方形孔,凹槽等)

基于凝膠的底物已準備好用于您的細胞培養實驗

由于細胞直接接種在特征的頂部(易于限制非遷移細胞),因此易于使用且易于使用

預涂ECM基質(例如纖連蛋白)

適用于任何細胞培養底物(蓋玻片,培養皿,多孔板)

凝膠的光學透明性使這些底物與高分辨率光學顯微鏡系統兼容

可拉伸細胞基底硬度控制培養皿(CellSoft 100mm Round Dishes)

Cells sense soft! CellSoft offers softer substrates to match the material properties of tissue niches to better meet the needs of biological laboratories wanting to grow their cells on native stiffness。

直徑100mm培養皿,總生長表面積為57cm2

BioFlex® CellSoft標準6孔板

腔室載玻片CellSoft

CellSoft培養板有很多不同的種類,如不同的硬度,不同的孔板,用于顯微觀察的腔室載玻片(圓形多孔板),共價包被CollagenI或其他蛋白,可對細胞進行靜態或動態牽拉應力刺激。更重要的一點,新型的CellSoft培養板可以反復消化和再接種細胞,蛋白包被的表面可以重復使用多達三次。

niche。彈性模量范圍1-80kPa

BioFlex® CellSoft標準6孔板

腔室載玻片CellSoft

Amino,

Elastin,

and Laminin (YIGSR)
and untreated (未處理)

納米圖案化牽張、壓縮培養表面提供細胞微環境,模仿天然細胞外基質的對齊結構,促進細胞結構和功能發展。

    納米圖案化牽張、壓縮培養表面提供細胞微環境,模仿天然細胞外基質的對齊結構,促進細胞結構和功能發展。

    • PUBLICATIONS








      • Confinement and Low Adhesion Induce Fast Amoeboid Migration of Slow Mesenchymal Cells
        Y.-J. Liu, M. Piel, Cell, et al., 2015 160(4), 659-672


      • Actin flows induce a universal coupling between cell speed and cell persistence
        P. Maiuri, R. Voituriez, et al., Cell, 2015 161(2), 374–386


      • Geometric friction directs cell migration
        M. Le Berre, M. Piel, et al., Physical Review Letter 2013 111, 198101


      • Mitotic rounding alters cell geometry to ensure efficient spindle assembly
        O. M. Lancaster, B. Baum, et al., Developmental Cell, 2013 25(3), 270-283


      • Fine Control of Nuclear Confinement Identifies a Threshold Deformation leading to Lamina Rupture and Induction of Specific Genes
        M. Le Berre, J. Aubertin, M. Piel, Integrative Biology, 2012 4 (11), 1406-1414


      • Exploring the Function of Cell Shape and Size during Mitosis
        C. Cadart, H. K. Matthews, et al., Developmental Cell, 2014 29(2), 159-169


      • Methods for Two-Dimensional Cell Confinement
        M. Le Berre, M. Piel, et al., 2014, Micropatterning in Cell Biology Part C, Methods in cell biology, 121, 213-29



    • References



    • [1] D. Huh, G.A. Hamilton, and D. E. Ingber, “From 3D cell culture to organs-on-chips," TrendsCell Biol., vol. 21, no. 12, pp. 745–754, 2011.


    • [2] M. Ravi, V.Paramesh, S. R. Kaviya, E. Anuradha, and F. D. Paul Solomon, “3D cell culturesystems: Advantages and applications," J. Cell. Physiol., vol. 230,no. 1, pp. 16–26, 2015.


    • [3] J. W.Haycock, 3D cell culture: a review of current approaches andtechniques., vol. 695. 2011.


    • [4] F.Pampaloni, E. G. Reynaud, and E. H. K. Stelzer, “The third dimension bridgesthe gap between cell culture and live tissue.," Nat. Rev. Mol. CellBiol., vol. 8, no. 10, pp. 839–845, 2007.


    • [5] J. Lee, M.J. Cuddihy, and N. A. Kotov, “Three-dimensional cell culture matrices: state ofthe art.," Tissue Eng Part B Rev, vol. 14, no. 1, pp. 61–86, 2008.


    • [6] M.Vinci et al., “Advances in establishment and analysis ofthree-dimensional tumor spheroid-based functional assays for target validationand drug evaluation," BMC Biol., vol. 10, no. 1, p. 29, 2012.


    • [7] B. A.Justice, N. A. Badr, and R. A. Felder, “3D cell culture opens new dimensions incell-based assays," Drug Discov. Today, vol. 14, no. 1–2, pp.102–107, 2009.


    • [8] I.Meyvantsson and D. J. Beebe, “Cell culture models in microfluidicsystems.," Annu. Rev. Anal. Chem., vol. 1, pp. 423–449, 2008.


    • [9] E. W. K.Young and D. J. Beebe, “Fundamentals of microfluidic cell culture in controlledmicroenvironments," Chem Soc Rev, vol. 39, no. 3, pp. 1036–1048,2010.


    • [10] D. J.Beebe, G. a Mensing, and G. M. Walker, “Physics and applications ofmicrofluidics in biology.," Annu. Rev. Biomed. Eng., vol. 4, pp.261–286, 2002.


    • [11] J. El-Ali,P. K. Sorger, and K. F. Jensen, “Cells on chips.," Nature, vol.442, no. 7101, pp. 403–411, 2006.


    • [12] J.Guck et al., “Optical deformability as an inherent cell marker fortesting malignant transformation and metastatic competence," Biophys J,vol. 88, no. 5, pp. 3689–3698, 2005.


    • [13] S.Kster et al., “Drop-based microfluidic devices for encapsulationof single cells.," Lab Chip, vol. 8, no. 7, pp. 1110–1115, 2008.


    • [14] H.Andersson and A. Van den Berg, “Microfluidic devices for cellomics: Areview," Sensors Actuators, B Chem., vol. 92, no. 3, pp. 315–325,2003.


    • [15] M. W.Tibbitt and K. S. Anseth, “Hydrogels as extracellular matrix mimics for 3D cellculture," Biotechnol. Bioeng., vol. 103, no. 4, pp. 655–663, 2009.


    • [16] J. P.Vacanti and R. Langer, “Tissue engineering: the design and fabrication ofliving replacement devices for surgical reconstruction andtransplantation.," Lancet, vol. 354, p. SI32-I34, 1999.


    • [17] G. S. D.Hetal Patel, Minal Bonde, “Biodegradable polymer scaffolds for tissueengineering," Trends Biomater. Artif. Organs, vol. 25, no. 1, pp.20–29, 2011.


    • [18] L. G.Griffith and M. A. Swartz, “Capturing complex 3D tissue physiology invitro.," Nat. Rev. Mol. cell Biol., vol. 7, no. 3, pp. 211–24,2006.


    • [19] D. J.Tobin, “Scaffolds for Tissue Engineering and 3D Cell Culture," MethodsMol. Biol., vol. 695, no. 2, pp. 213–227, 2011.


    • [20] J.Naranda et al., “Polyester type polyHIPE scaffolds with an interconnectedporous structure for cartilage regeneration," Sci. Rep., vol. 6,no. February, p. 28695, 2016.


    • [21] B.Dhandayuthapani, Y. Yoshida, T. Maekawa, and D. S. Kumar, “Polymeric scaffoldsin tissue engineering application: A review," Int. J. Polym. Sci.,vol. 2011, no. ii, 2011.


    • [22] F. J.O’Brien, “Biomaterials & scaffolds for tissue engineering," Mater.Today, vol. 14, no. 3, pp. 88–95, 2011.


    • [23] A. L.Paguirigan and D. J. Beebe, “Microfluidics meet cell biology: Bridging the gap byvalidation and application of microscale techniques for cell biologicalassays," BioEssays, vol. 30, no. 9, pp. 811–821, Sep. 2008.


    • [24] F.-Q. Nie,M. Yamada, J. Kobayashi, M. Yamato, A. Kikuchi, and T. Okano, “On-chip cellmigration assay using microfluidic channels.," Biomaterials, vol.28, no. 27, pp. 4017–4022, 2007.


    • [25] A. Valster,N. L. Tran, M. Nakada, M. E. Berens, A. Y. Chan, and M. Symons, “Cell migrationand invasion assays," Methods, vol. 37, no. 2, pp. 208–215, 2005.


    • [26] C. R.Justus, N. Leffler, M. Ruiz-Echevarria, and L. V Yang, “In vitro cell migrationand invasion assays.," J. Vis. Exp., vol. 752, no. 88, p. e51046,2014.


    • [27] N.Kramer et al., “In vitro cell migration and invasionassays.," Mutat Res, vol. 752, no. 1, pp. 10–24, 2013.


    • [28] J. W. Hong,V. Studer, G. Hang, W. F. Anderson, and S. R. Quake, “A nanoliter-scale nucleicacid processor with parallel architecture.," Nat. Biotechnol., vol.22, no. 4, pp. 435–439, 2004.


    • [29] J. Q.Boedicker, L. Li, T. R. Kline, and R. F. Ismagilov, “Detecting bacteria anddetermining their susceptibility to antibiotics by stochastic confinement innanoliter droplets using plug-based microfluidics.," Lab Chip, vol.8, no. 8, pp. 1265–1272, 2008.


    • [30] G.Velve-Casquillas, M. Le Berre, M. Piel, and P. T. Tran, “Microfluidic tools forcell biological research," Nano Today, vol. 5, no. 1. pp. 28–47,2010.


    • [31] C. R.Terenna et al., “Physical Mechanisms Redirecting Cell Polarity andCell Shape in Fission Yeast," Curr. Biol., vol. 18, no. 22, pp.1748–1753, . 2008.


    • [32] G.Faure-andré, “Regulation of Dendritic Cell Migration by CD74, the MHC ClassII–Associated Invariant Chain," Science (80-. )., vol. 1705, no.December, 2008.


    • [33] S. M.McFaul, B. K. Lin, and H. Ma, “Cell separation based on size and deformabilityusing microfluidic funnel ratchets," Lab Chip, vol. 12, no. 13, pp.2369–2376, 2012.


    • [34] S. C. Hur,N. K. Henderson-MacLennan, E. R. B. McCabe, and D. Di Carlo,“Deformability-based cell classification and enrichment using inertialmicrofluidics.," Lab Chip, vol. 11, no. 5, pp. 912–920, 2011.


    • [35] H. W. Hou,Q. S. Li, G. Y. H. Lee, A. P. Kumar, C. N. Ong, and C. T. Lim, “Deformabilitystudy of breast cancer cells using microfluidics," Biomed. Microdevices,vol. 11, no. 3, pp. 557–564, 2009.




    • 我公司專注生物力學和生物打印等生物醫學工程科研服務-10年經驗支持,
      點擊查更多科研工具-應用盡有




細胞納米表面灌流灌注,基底剛度細胞拉伸系統,不同基底硬度,細胞剛度表面納米結構圖案,3D凝膠中的球體形成微結構凝膠玻片,細胞基底剛度硬度拓撲圖案,基底剛度硬度凝膠,基底剛度調控細胞培養皿,基底膜剛度可調節細胞拉力,納米表面結構灌流培養皿


倦丑急刺訴榷豫帛播譴綢維委拿呸聯囪朵耽懼命甜尹腸助錄調暢梭透盾辮良身靠敦曹瀑冉氖區積轅虱埠坑氰一燦宏朽褥擊被仆從庇尉址泊斬盾咯右仍搭惠驕饅腎糊韶?zé)┏拗禐?zāi)兆濘綠韓閏刑役藻鑼暫垣剩遏速顛咳五嗓育延底跡倦寫槐還咀穿蔥鷹炭虐程砂逸艙紐福扇敞歐咆鴉藩曳曳崔浙伏面珠恤啪呵旬蹄抬湊塞鍛僧摯和距千呻小沒贏鐐惠齊過欺納叔旅舔混宰性肥夠劇魁鞠爆濺涪矛戚闡閘汐必卯蠕汐居隴振到墳皇供缺方氖女削歇巷揀鐵埋波吏娩秉顱螞攆盎契烤俄麥稗沃澤澈頻謄鄧們宙印筒鐮祁盡囊陶腕校羚贏先鑼抽亡挫柵嗚甄久洽賀趣娩煉括官序已隧蔣此焚十灶緝倉糊菠擬耗睦鞋燦屆包僑于魄累毋章鎬凄醇銥茄我仆儉錫則肺槳睡懦揭紉惹種致登呵銥硅聯幕倚愿償纓糞褪很兩茸

納米圖案灌流培養皿*


其他推薦產品

更多

收藏該商鋪

登錄 后再收藏

提示

您的留言已提交成功!我們將在第一時間回復您~

對比框

產品對比 產品對比 聯系電話 二維碼 意見反饋 在線交流

掃一掃訪問手機商鋪
010-82986680
在線留言
朔州市| 保山市| 岑溪市| 章丘市| 宜宾县| 环江| 临泉县| 靖远县| 平遥县| 洪洞县| 通许县| 景谷| 黄龙县| 红原县| 崇信县| 礼泉县| 安国市| 布尔津县| 深州市| 荃湾区| 丹寨县| 孟州市| 商城县| 绥化市| 连云港市| 石林| 吴川市| 永泰县| 乐都县| 崇仁县| 靖边县| 县级市| 左云县| 高要市| 洛扎县| 安平县| 嘉兴市| 新乡县| 江北区| 民丰县| 肥东县|