Olympus奧林巴斯NORTEC 500/600渦流探頭傳感器大全

如果您在選擇探頭上有任何疑問(wèn)，歡迎聯(lián)系我們-增宜檢測(cè)技術(shù)（上海）有限公司，我們資深的探頭工程師一定能幫您找出適合您的探頭。

Display Name	UPC Code	Description
Q3300971	0.5L64-96X22-I5-P-5-OM
U8840160	0320806	4 mil Shim Samples (set of 2)
U8779068	0321004	Thickness Gage assortment. 5 in. long 13 sizes between .001 Inch and .030 Inch
Q2501090	10-006806-00
U8990444	1823234	"V-notch" collar to aid in holding probe on rounded surface. For use with "P/X-X/X" series.
U8250005	18BE0007	Teflon tape, 0.002 inch thick x 1/4 inch wide (36 yards)
Q3300970	1L64-96X22-I5-P-5-OM
U8779668	28GA5208	Gel sheet 12'' x 12'' x 0.5''
U8901365	3303965	Teflon Tape - 1/4 in.
U8901366	3304920	Roll of Teflon Tape (1 in.)
U8330711	7.5L16-4.96X5-A00-P-2.5-OM	Standard Phased Array Probe, 7.5 MHz Linear Array, 16 Elements, 4.96x5 mm Total Active Aperture, 0.31 mm Pitch, 5 mm Elevation, A00 Case Type, Impedance Matching to Rexolite, PVC Sheathing, 2.5 m Cable Length, Omniscan Connector
U8800041	9102894	Cable, 6 foot length, BNC to Microdot cable
U8800048	9113016	"Cable, 6 foot length, Bridge coil configuration for probes with Fischer/Lemo Triaxial connector to NDT-19, NDT-24 instruments with 8 Pin Burndy connector.   Model: C/SC/6"
U8800050	9113429	Cable, 6 foot length, Reflection coil configuration for probes with Fischer/Lemo Triaxial connector to 8 Pin Burndy (CR/SC/6)
U8800053	9116184	Cable, 8 foot (2.4 Meter) length, 8 pin Burndy connector to dual microdot connector. Used to connect adjustable sliding probes to the NDT-19 and NDT-24 series instruments, reflection coil configuration.
U8800058	9117789	BondMaster cable - SBM-CPM-P11 11 pin to 11 pin cable used on Pitch Catch and MIA probes
U8800059	9117790	BondMaster cable - SBM-CR-P6 11 pin to 6 pin cable used on Resonance probes.
U8800062	9118328	Cable 6 foot length, Reflection coil configuration probes with Triax Fischer/Lemo to Elotest 8 Pin Fischer.
U8800063	9118388
U8800064	9118630
U8800073	9122083	Cable, 6 foot length, PowerLink Bridge/Reflection Cable for probes with 7 Pin Lemo to 16 Pin Lemo to connect to N1000, N2000 , N500 ro N600 series instruments. (CL/SC/6)
U8800075	9122089	Scanner Cable, 8 foot 6 inch length, MiniMite, RA 2000 and Spitfire 2000 to Nortec 2000/3000 and Nortec 500S/D  - right angle
U8800076	9122090	Scanner Cable, 8 foot  6 inch length, MiniMite, RA 2000, Spitfire 2000 and PS-5AL to Nortec 2000, Nortec 500S/D Scanner cable. (Requires modification to PS-5)
U8800082	9122200	Cable, 6 foot length, Bridge coil configuration for probes with Fischer/Lemo Triaxial connector to 12 Pin Lemo (Hocking Phasec 2200)
U8779012	9122205	SPO-2182 DUAL MD REFLECTION TO ELOTEST
U8800658	9122207	CR/SC/6 Phasec 2200
U8800086	9122229	Universal Battery Charger (UBC) to Li-Ion instrument cable - Nortec 2000S+, Nortec 2000D+ or B1000e+
U8800087	9122230	Universal Battery Charger (UBC) to Ni-MH instrument cable - Nortec 1000/2000 series or BM1000
U8800091	9122244	Cable, 6 foot length, Bridge coil configuration, 16 Pin Lemo to Fischer/Lemo Triax  (SPO-6472)
U8600344	9122245	Cable, 6 foot length, Bridge coil configuration for probes with Fischer/Lemo Triaxial connector to 4 Pin Fisher connector, for use with MIZ21 (C/SC/6 MIZ21)
U8800095	9122267	Cable, 6 foot length, Reflection coil configuration probes with 4 Pin Fischer connector to Nortec 500, 600 and 2000 series instruments with 16 Pin LEMO.   Model: SPO-6388
U8779079	9122348	"Cable, 6 foot length, 4pin Fischer (MIZ21) to PowerLink Bridge coil configuration probe.   Model: F4-L7-B-6"
U8800744	9122354	"Cable 30 foot length, PowerLink Bridge/Reflection Cable for probes with 7 Pin Lemo to 16 Pin Lemo to connect to N1000, N2000, N500 or N600 series instruments.   Model: CL/SC/30"
U8800878	9122360	Scanner Cable, 16PL-12PL  Hocking Mini-Rotor Scanner cable for use with N500 or N600.
U8801134	9122390	Cable 6 foot length, bridge coil configuration probes with 7 pin Lemo connector to Phasec instrument (12 pin Lemo). This item supersedes P/N CH22-7L-6.
Q2500080	9122405
U8629041	9204413
U8623148	9213013	Pencil Absolute Shielded Metal Detachable Pencil Probe. Operates on a 100KHz-500KHz frequency range. Right angle shaft with a  0.50" drop. Total length of 6 inches. (Right Angle Pencil Probe)
U8623153	9213403
U8623154	9213404
U8623159	9213409	Nortec Standard Detachable Pencil Probe. Detachable Absolute Shielded with a frequency range of 1MHz- 2MHz (P/1Mhz-2Mhz/A)
U8623170	9213420
U8623173	9213423
U8623001	9213546	Surface Probe, Standard Bridge Detachable Surface Probe with a diameter of .25 in. (6.3 mm) and a operating range of 5 kHz - 100 kHz (equivalent to SPO-2132), Triax Fischer/LEMO Connector
U8623002	9213547	Surface Probe, Standard Bridge Detachable Surface Probe with a diameter of .44 in. (11.2 mm) and a operating range of 500 Hz - 40 kHz (equivalent to SPO-1402, SPO-1391), Triax Fischer/LEMO Connector
U8623005	9213550	Surface Probe, Standard Reflection Detachable Surface Probe with a diameter of .25 in. (6.3 mm) and a operating range of 2 kHz - 200 kHz (equivalent to APR/7/S, SPO-2404), Triax Fischer/LEMO Connector
U8623006	9213551	Surface Probe, Standard Reflection Detachable Surface Probe with a diameter of .31 in. (7.9 mm) and a operating range of 700 Hz - 80 kHz (equivalent to APR/8/S, SPO-2026), Triax Fischer/LEMO Connector
U8623007	9213552.01	Surface Probe, Standard Reflection Detachable Surface Probe with a diameter of .44 in. (11.2 mm) and a operating range of 500 Hz - 60 kHz (equivalent to APBK/10.5/S, SPO-2025), Triax Fischer/LEMO Connector
U8623008	9213553	Surface Probe, Standard Reflection Detachable Surface Probe with a diameter of .50 in. (12.7 mm) and a operating range of 300 Hz - 40 kHz (equivalent to APB/12.5/S, SPO-2136), Triax Fischer/LEMO Connector
U8623009	9213554	Surface Probe, Standard Reflection Detachable Surface Probe with a diameter of .62 in. (15.7 mm) and a operating range of 100 Hz - 20 kHz (equivalent to APG/16/S. SPO-2134), Triax Fischer/LEMO Connector
U8602004	9216156
U8623178	9216191	Pencil Absolute Shielded Metal Detachable Pencil Probe. Operates on a 100KHz-500KHz frequency range. Straight through shaft. Total length of 4 inches. (P/100Khz-500Khz/A/0.0/4)
U8623214	9216216	Right angle metal shaft surface probe, 6 inch (15.2cm) overall length with 0.5 inch (12.7mm) drop at tip. Operating frequency 50kHz -100kHz,  triax Fischer/LEMO connector, unshielded bridge coil configuration.   Model: P/50Khz-100Khz/AU/90.50/6
U8623189	9216220	Pencil Absolute Shielded Metal Detachable Pencil Probe. Operates on a 50KHz-100KHz frequency range. Right angle shaft with a 0.50" drop. Total length of 6 inches. (P/50Khz-100Khz/A/90.5/6)
U8623011	9216541	Surface Probe, Standard Bridge Detachable Surface Probe with a diameter of .25 in. (6.3 mm) and a operating range of 100 kHz - 500 kHz, Triax Fischer/LEMO Connector
U8670037	9216633
U8614091	9217153	Rotating Scanner Probe, SPO-3564, Probe Diameter 0.187 in. - 0.218 in., Working Length 1.1 in. (28 mm), Operates 500 kHz - 3 MHz (SPO-3564 .187-.218)
U8614092	9217154	Rotating Scanner Probe, SPO-3564, Probe Diameter 0.218 in. - 0.250 in., Working Length 1.1 in. (28 mm), Operates 500 kHz - 3 MHz (SPO-3564)
U8614093	9217155	Rotating Scanner Probe, SPO-3564, Probe Diameter 0.250 in. - 0.281 in., Working Length 1.1 in. (28 mm), Operates 500 kHz - 3 MHz (SPO-3564)
U8614094	9217156	Rotating Scanner Probe, SPO-3564, Probe Diameter 0.281 in. - 0.312 in., Working Length 1.5 in. (38 mm), Operates 500 kHz - 3 MHz (SPO-3564)
U8614095	9217157	Rotating Scanner Probe, SPO-3564, Probe Diameter 0.312 in. - 0.375 in., Working Length 1.5 in. (38 mm), Operates 500 kHz - 3 MHz (SPO-3564)
U8614096	9217158	Rotating Scanner Probe, SPO-Working Length 1.5 in. (38 mm), Operates 500 kHz - 3 MHz (SPO-3564), .375 -.437 1.5 in WL
U8614097	9217159	Rotating Scanner Probe, SPO-3564, Probe Diameter 0.437 in. - 0.500 in., Working Length 1.5 in. (38 mm), Operates 500 kHz - 3 MHz (SPO-3564)
U8614098	9217160	Rotating Scanner Probe, SPO-3564, Probe Diameter 0.500 in. - 0.562 in., Working Length 1.5 in. (38 mm), Operates 500 kHz - 3 MHz (PO-3564)
U8633003	9217891	SPO-5330   SR/100Hz-20Khz/.62
U8633004	9217896	Low frequency detachable shielded "reflection" surface probe, 5/16 inch (7.9 mm) diameter x 2 in. (5.08 mm) tall. Operates between 700 Hz and 80 kHz with Triax Fischer/ Lemo connector.   SPO-5327 SR/700HZ-80KHZ/.31
U8633005	9218108	SPO-5328 Spot Probe, 500 Hz to 60 kHz, Corrosion Probe, 11.2 mm (0.44 in.) diameter, Triax Fischer/LEMO Connector
U8629128	9218203	SPO-5329 300Hz-40KHz .50
U8629537	9218204	SPO-5326 2KHz-200Khz/.25 Special Purpose Corrosion Probe Designed for use on Aluminum structures
U8690014	9218430	SPO-1958 Sliding Probe with Elotest Cable
U8629543	9218631
U8614101	9218787	Rotating Scanner Probe, SPO-3564, Probe Diameter 0.687 in. - 0.750 in., Working Length 1.5 in. (38 mm), Operates 500 kHz - 3 MHz (SPO-3564)
U8610230	9219978	Universal Rotary Hole Probe 0.375 inch (9.5mm)  to 0.437 inch (11.0mm) diameter, Self Expanding 2 inch (50 mm) working length. Operating frequency 200 kHz - 3 MHz  Fischer 4 pin connector, reflection differential coil configuration (SPO-5965 .375-.437)
U8610231	9219979	Universal Rotary Hole Probe 0.187 inch (4.7mm)  to 0.218 inch (5.5mm) diameter, Self Expanding 1.75 inch (44 mm) working length, Operating frequency 200 kHz - 3 MHz  Fischer 4 pin connector, reflection differential coil configuration (SPO-5965 .187-.218)
U8610232	9219980	Universal Rotary Hole Probe 0.218 inch (5.5 mm)  to 0.250 inch (6.3mm) diameter, Self expanding 2.00 inch(50 mm) working length, Operating frequency 200 kHz - 3 MHz  Fischer 4 pin connector, reflection differential coil configuration(SPO-5965 .218 - .250)
U8610233	9219981	Universal Rotary Hole Probe 0.250 inch (6.3 mm)  to 0.281 inch (7.1mm) diameter, Self expanding 2.00 inch(50 mm) working length, Operating frequency 200 kHz - 3 MHz  Fischer 4 pin connector, reflection differential coil configuration(SPO-5965 .250 - .281)
U8610234	9219982	Universal Rotary Hole Probe 0.281 inch (7.3 mm)  to 0.312 inch (7.9 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 200 kHz - 3 MHz  Fischer 4 pin connector, reflection differential coil configuration(SPO-5965 .281-.312)
U8610235	9219983	Universal Rotary Hole Probe 0.312 inch (7.9 mm)  to 0.375 inch (9.5 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 200 kHz - 3 MHz  Fischer 4 pin connector, reflection differential coil configuration (SPO-5965 .312-.375)
U8610236	9219984	Universal Rotary Hole Probe 0.437 inch (11 mm)  to 0.500 inch (12.6 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 200 kHz - 3 MHz  Fischer 4 pin connector, reflection differential coil configuration (SPO-5965 .437-.500)
U8610237	9219985	Universal Rotary Hole Probe 0.500 inch (12.6 mm)  to 0.562 inch (14.2 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 200 kHz - 3 MHz  Fischer 4 pin connector, reflection differential coil configuration (SPO-5965 .500-.562)
U8610238	9219987	Universal rotary hole probe 0.250 inch (6.3mm) fixed diameter, 2 inch (50.8mm) working length. Operating frequency 200KHz -3MHz, Fischer 4 pin connector, reflection differential coil configuration. Model: SPO-5393 1/4 2IN WL
U8610239	9219988	Universal rotary hole probe 0.281 inch (7.1mm) fixed diameter, 2 inch (50.8mm) working length. Operating frequency 200KHz -3MHz, Fischer 4 pin connector, reflection differential coil configuration. Model: SPO-5393 9/32 2IN W/L
U8610250	9219999	Universal rotary hole probe 0.156 inch (3.9mm) fixed diameter, 2 inch (50.8mm) working length. Operating frequency 200KHz -3MHz, Fischer 4 pin connector, reflection differential coil configuration. Model: SPO-5393 5/32 2IN W/L
U8610251	9220000	Universal rotary hole probe 0.187 inch (4.7mm) fixed diameter, 2 inch (50.8mm) working length. Operating frequency 200KHz -3MHz, Fischer 4 pin connector, reflection differential coil configuration. Model: SPO-5393 3/16 2IN W/L
U8626003	9222160	Surface Probe, Powerlink Standard Relfection Detachable Surface Probe with a diameter of .62 in. (15.7 mm) and a operating range of 100 Hz - 20 kHz (equivalent to APG/16/S, SPO-2134), 7-pin LEMO Powerlink Connector
U8626004	9222161	Surface Probe, Powerlink Standard Bridge Detachable Surface Probe with a diameter of .31 in. (7.9 mm) and a operating range of 1 kHz - 50 kHz (equivalent to SPO-1284, SPO-1598), 7-pin LEMO Powerlink Connector
U8626024	9222162	Nortec Powerlink Detachable Pencil Probe. Detachable Absolute Shielded with a frequency range of 500KHz- 1MHz (PL/500KHZ-1MHZ/A)
U8626025	9222163	Nortec Powerlink Detachable Pencil Probe. Detachable reflection Differential Shielded with a frequency range of 500KHz- 3MHz (PRL/500Khz-3Mhz/D)
U8616094	9222165	Bridge Absolute Shielded Metal Detachable Pencil Probe. Operates on a 50KHz-100KHz frequency range. Straight through shaft . Total length of 4 inches. (ML/50Khz-100Khz/A/0.0/4)
U8626027	9222180	Nortec Powerlink Detachable Pencil Probe. Detachable Absolute Shielded with a frequency range of 100KHz- 500KHz (PL/100Khz-500Khz/A)
U8626028	9222181	Nortec Powerlink Detachable Pencil Probe. Detachable Absolute Shielded with a frequency range of 1MHz- 2MHz (PL/1Mhz-2Mhz/A)
U8626029	9222184	Nortec Powerlink Detachable Pencil Probe. Detachable Differential Shielded with a frequency range of 500KHz- 2MHz (PL/500Khz-2Mhz/D)
U8626006	9222193	Surface Probe, Powerlink Standard Bridge Detachable Surface Probe with a diameter of .62 in. (15.7 mm) and a operating range of 300 Hz - 10 kHz (equivalent to SPO-565, SPO-1125), 7-pin LEMO Powerlink Connector
U8626007	9222196	Surface Probe, Powerlink Standard Bridge Detachable Surface Probe with a diameter of .25 in.(6.3 mm) and a operating range of 5 kHz - 100 kHz (equivalent to SPO-1284, SPO-1598), 7-pin LEMO Powerlink Connector
U8626010	9222200	Surface Probe, Powerlink Standard Relfection Detachable Surface Probe with a diameter of .31 in. (7.9 mm) and a operating range of 700 Hz - 80kHz (equivalent to APR/8/S, SPO-2026), 7-pin LEMO Powerlink Connector
U8626011	9222201	Surface Probe, Powerlink Standard Relfection Detachable Surface Probe with a diameter of .25 in. (6.3 mm) and a operating range of 2 kHz - 200 kHz (equivalent to APR/7/S, SPO-2404), 7-pin LEMO Powerlink Connector
U8616095	9222202	Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/Lemo "PowerLink". Operates on a 100KHz-500KHz frequency range. Straight through shaft . Total length of 4 inches. (ML/100Khz-500Khz/A/0.0/4)
U8616096	9222204	Bridge Absolute Shielded Metal Detachable Pencil Probe. Operates on a 100KHz-500KHz frequency range. Right angle shaft with a 0.03" drop. Total length of 6 inches. (ML/100Khz-500Khz/A/90.03/6)
U8616099	9222207	Bridge Absolute Shielded Metal Detachable Pencil Probe. Operates on a 500KHz-1MHz frequency range. Right angle shaft with a 0.25" drop. Total length of 6 inches. (ML/500Khz-1Mhz/A/90.25/6)
U8626047	9222209
U8616102	9222214	Reflection Absolute Shielded Metal Detachable Pencil Probe. Operates on a 500KHz-2MHz frequency range. Right angle shaft with a 0.25" drop. Total length of 6 inches.(MRL/500Khz-2Mhz/A/90.25/6)
U8616103	9222215	Reflection absolute shielded metal shaft detachable pencil probe. Operates on a 50KHz-500KHz frequency range. Right angle shaft with a 0.50 inch (12.7mm) drop and a total length of 6 inches (15.2cm). (MRL/50Khz-500Khz/A/90.5/6)
U8616104	9222216	Bridge Absolute Shielded Metal Detachable Pencil Probe. Operates on a 500KHz-2MHz frequency range. Right angle shaft with a 0.50" drop. (MRL/500Khz-2Mhz/A/90.5/6)
U8609160	9222217
U8609161	9222218
U8609162	9222219
U8609163	9222220
U8634050	9222237
U8623194	9222308	Surface Probe, Powerlink Standard Bridge Detachable Surface Probe with a diameter of .25 in.(6.3 mm) and a operating range of 100 kHz - 500 kHz, 7-pin LEMO Powerlink Connector
U8626053	9222337	Bridge Absolute Shielded Flexible Metal Detachable Pencil Probe. 7 Pin Fischer/Lemo "PowerLink". Operates on a 100KHz-500KHz frequency range. Right Angle shaft with a 0.50" drop. Total length of 6 inches (ML/100KHZ-500KHZ/A/90.5/6FX).
U8690027	9222340	Conductivity Probe, 60 kHz, Right Angle Probe, 0.750 in. (20 mm) tip diameter, 1.00 in. (25.4 mm) length, 16-pin LEMO connector. Used with Nortec 500C, 500S, 500D, 600C, 600S, 600D, 1700, 2000, 3000, and WorkStation instruments. Includes Alarm LED.
U8690028	9222341	Conductivity Probe, 480 kHz, Right Angle,.750 in. (20 mm) tip diameter,  16-pin LEMO connector. Used with Nortec 500C, 500S, 500D, 600C, S or D instruments. Includes Alarm LED.
U8670043	9222342
U8626054	9222355	Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/Lemo "PowerLink", Operates on a 50Khz-500Khz and has a center frequency of 200Khz, 45 degree angle, 0.50 in. drop with a 0.125" diameter tip. 6 inch overall length. (ML/100KHZ-500KHZ/A/45.5/6)
U8690029	9222360	SPO-887L Conductivity Probe, 60 kHz, Straight Probe, .312 in. diameter with Alarm LED, 16-pin LEMO Connector
U8690030	9222361	Conductivity Probe, 480 kHz , Straight Probe, .312 in. diameter with Alarm LED, 16-pin LEMO Connector
U8626012	9222456	Surface Probe, Powerlink Standard Bridge Detachable Surface Probe with a diameter of .44 in. (11.2 mm) and a operating range of 500 Hz - 40 kHz (equivalent to SPO-1402, SPO-1391), 7-pin LEMO Powerlink Connector
U8616106	9222473	Bridge Absolute Shielded Metal Detachable Pencil Probe. Operates on a 50KHz-100KHz frequency range. Right angle shaft with a 0.03" drop. Total length of 6 inches. (ML/50KHZ-100KHZ/A/90.03/6 Probe)
U8616108	9222476	Bridge Absolute Shielded Metal Detachable Pencil Probe. Operates on a 50KHz-100KHz frequency range. Right angle shaft with a 0.50" drop. Total length of 6 inches. (ML/50KHZ-100KHZ/A/90.5/6 Probe)
U8610266	9230035	Universal rotary hole probe 0.218 inch (5.5mm) fixed diameter, 2 inch (50.8mm) working length. Operating frequency 200KHz -3MHz, Fischer 4 pin connector, reflection differential coil configuration. Model: SPO-5393 7/32 2IN W/L
U8610267	9230061	Universal Rotary Hole Probe 0.156 inch (3.96 mm)  to 0.187 inch (4.7 mm) diameter, Self Expanding 1.75 inch (44 mm) working length, Operating frequency 200 kHz - 3 MHz  Fischer 4 pin connector, reflection differential coil configuration (SPO-5965 .156-.187)
U8614059	9230078	Rotating Scanner Probe, SPO-3564, Probe Diameter 0.156 in. -0.187 in., Working Length 1.1 in. (28 mm), Operates 500 kHz - 3 MHz (SPO-3564)
U8629146	9230150
U8610253	9230157	Universal Rotary Hole Probe 0.625 inch (15.8 mm)  to 0.687 inch (17.4 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 200 kHz - 3 MHz  Fischer 4 pin connector, reflection differential coil configuration (SPO-5965 .625-.687)
U8616122	9230174	Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/Lemo "PowerLink"  Right Angle shaft with a 0.50" drop. Operates on a 100KHz-500KHz frequency range. Total length of 3 inches (ML/100KHZ-500KHZ/A/90.5/3).
U8630008	9230193	SPO-1071L Probe Right angle 1Khz-10Khz frequency 0.31 inch (7.8mm) diameter surface probe, bridge coil configuration with integral 6 foot (1.8m) 16 Pin Lemo cable.
U8614284	9230238	"PowerLink straight metal shaft surface probe, 4 inch (10.1cm) overall length. Operating frequency 50kHz -500kHz, 7 pin Lemo connector, bridge coil configuration.   Model: ML/50KHZ-500KHZ/A/0.0/4"
U8626061	9230248	Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/Lemo "PowerLink" straight through shaft. Operating frequency 100 Khz-500Khz. 3 inch overall length. (ML/100KHZ-500KHZ/A/0.0/3)
U8800738	9230259	Cable, 6 foot (1.83 Meter) length, 16 pin LEMO connector to Microdot connector with 120uH balance coil (50kHz).
U8626062	9230289	"Straight metal shaft surface probe, 6 inch (15.2cm) overall length. Operating frequency 100kHz -500kHz,  7 pin Lemo (PowerLink) connector, bridge coil configuration.   Model: ML/100KHZ-500KHZ/A/0.0/6"
U8629094	9230334	"Ring probe, 0.53 inch (13.4mm) ID X 0.88 inch (22.3cm) OD. Operating frequency 100Hz -10kHz. Integral 6 foot (1.8m) cable with 16 pin Lemo connector, reflection coil configuration.   Model: SPO-2434L"
U8800637	9230374	SPO-2182 Dual Microdot Reflection to 16 Pin LEMO cable for adjusting sliding probes.
U8614285	9230384	PowerLink right angle 'flexible' metal shaft surface probe, 6 inch (15.2cm) overall length with 0.2 inch (5.08mm) drop at tip. Operating frequency 50kHz -500KHz, 7 pin Lemo connector, bridge coil configuration.   Model: ML/50KHZ-500KHZ/A/90.2/6FX
U8614286	9230385	"PowerLink right angle bent metal shaft surface probe, 5 inch (12.7cm) overall length with 0.5 inch (12.7mm) drop at tip. Operating frequency 50kHz -500kHz, 7 pin Lemo connector, bridge coil configuration.   Model: ML/50KHZ-500KHZ/A/90.5/5B"
U8610985	9230387	"Straight metal shaft surface probe, 3 inch (7.6cm) overall length. Operating frequency 50kHz -500kHz,  7 pin Lemo (PowerLink) connector, bridge coil configuration.   Model: ML/50KHZ-500KHZ/A/0.0/3"
U8629090	9230388	Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/Lemo "PowerLink" Flexible straight shaft. Operating frequency 50Khz-500Khz, 4 inch overall length (ML/50KHZ-500KHZ/A/0.0/4FX)
U8629301	9230392	Adaptor, LEMO 16 Pin to Burndy 8 Pin, Bridge/Reflection Probe Type
U8629538	9230395	SPO-5326L 2Khz-200Khz Special Purpose Corrosion Probe Designed for use on Aluminum structures
U8629157	9230403	SPO-5328L 500HZ-60KHZ .44
U8629163	9230492	SPO-3806 Sliding Probe Reflection (Probe Only) Triax Lemo connector.
U8610280	9230531	Universal Rotary Hole Probe 0.125 inch (3.17 mm)  to 0.156 inch (3.96 mm) diameter, Self Expanding 1.75 inch (44 mm) working length, Operating frequency 200 kHz - 3 MHz  Fischer 4 pin connector, reflection differential coil configuration (SPO-5965 .125-.156)
U8800739	9230585	16 Pin LEMO to Microdot with Balance Coil 8.2UH cable, 6 foot long (1.8m) for single coil microdot probes operating between 1MHz - 2MHz .
U8670005	9230721
U8614109	9230784	Rotating Scanner Probe,SPO-3564, 200 kHz - 3 MHz , .125 in. to .156 in. hole size range, 1.1 inch working length, 4 Pin LEMO Connector?
U8800741	9230844	SPO-6599, 16 pin LEMO to dual BNC connectors, 6 inches (15.2cm) long.
U8800703	9230845	16 Pin to Microdot NPID-1024 cable – No balance coil – To be used with Nortec 2000D+ or N500 series instruments with internal balance coils. Not to be used with N600 series instruments.
U8633067	9230977
U8629180	9230982	SPO-1958 (Probe Only) Adjustable reflection Sliding probe with 2 single pin Microdot connectors.
U8610399	9230985	SPO-2210 (PROBE ONLY)
U8629476	9230999.00
U8670011	9231075
U8629540	9231109	NECP-1152 SS, Weld Probe,  Standard Bridge Detachable Weld Probe, 100 kHz - 1 MHz, 45 Degree, 7.9 mm (0.312 in.) Tip Diameter, Overall length 140.0 mm (5.5 in.), Triax Fischer/Lemo connector.
U8610410	9231147	Ring reflection probe with Fischer/ Lemo triax connection, 100Hz-1KHz frequency range (SPO-6087)
U8629497	9231155	Special purpose metal shaft probe. 5 inch overall length with 0.065 to 0.075 inch thick flat shaft 3 inches long. Side mounted 100 KHz shielded coil (0.125 inch diameter), microdot connector, absolute coil configuration. (SPO-3503)
U8629211	9231350	P/50KHZ-500KHZ/A/90.5/5
U8629992	9231640	PowerLink right angle "flexible" metal shaft surface probe, 4 inch (10.1cm) overall length with 0.5 inch (12.7mm) drop at tip. Operating frequency 100KHz -500KHz, 7 pin Lemo connector, bridge coil configuration (ML/100KHZ-500KHZ/A/90.5/4FX).
U8250101	9231641
U8629381	9231646
U8626039	9231662	Reflection Absolute unshielded Metal Detachable Pencil Probe. Operates on a 50KHz-500KHz frequency range. Right angle shaft with a 0.50" drop and bent stainless steel shaft. Total length of 6 inches. (MRL/50Khz-500Khz/Au/90.5/6BSS)?
U8629884	9231812	SPO-1957 (Probe Only) Adjustable reflection Sliding probe with 2 single pin Microdot connectors.
U8610678	9231813	"Right angle metal shaft surface probe, 4 inch (10.1cm) overall length with 0.2 inch (5.08mm) drop at tip. Operating frequency 100kHz -500kHz,  7 pin Lemo (PowerLink) connector, bridge coil configuration.   Model: ML/100KHZ-500KHZ/A/90.2/4"
U8610681	9231821	PowerLink right angle metal shaft surface probe, 4 inch overall length with 0.2 inch drop at tip. Operating frequency 100KHz -500KHz, 7 pin Lemo connector, differential bridge coil configuration. Probe is direction sensitive and operates from right to left motion (Wiper Mode "WP"), (ML/100KHZ-500KHZ/D/90.20/4/WP).
Q6700004	9323976
U8690033	9403356	Weld Probe, 100 kHz - 600 kHz, Straight Probe, 8.0 mm (0.314 in.) tip diameter, 5.5 cm (2.16 in.) length, 7-pin LEMO PowerLink Connector (WLD-8-55-7L)
U8629526	9403359	Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLink", Operates on a 50 kHz - 500 kHz and has a center frequency of 200 kHz, Straight shaft with a 0.125 in. diameter tip. 4 in. overall length. (ML/50Khz-500Khz/A/0.0/4)
U8629530	9403360	Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLink", Operates on a 50 kHz - 500 kHz and has a center frequency of 200 kHz, Right Angle Shaft, 0.20 in. (5.08 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. (ML/50Khz)
U8629269	9403361	Paint Thickness Probe, 5 kHz to 250 kHz, 6.35 mm (0.25 in.) tip diameter, 10.1 mm (4.0 in.) overall length, 7-pin LEMO PowerLink Connector.
U8629270	9403362	Straight Weld Probe, 100 kHz to 600 kHz, 5.0 mm (0.196 in.) tip diameter, 6.1 mm (2.4 in.) overall length, 7-pin LEMO PowerLink Connector (WLD-5-63-7L)
U8616149	9403364	"Straight metal shaft surface probe, 4 inch (10.1cm) overall length with 0.072 inch (1.8mm) diameter tip. Operating frequency 1MHz -3MHz,  7 pin LEMP (PowerLink) connector, bridge coil configuration.   Model: MM7L-40FX-1M-3M"
U8614296	9403372	PowerLink right angle metal shaft surface probe, 4 inch (10.1cm) overall length with 0.5 inch (12.7mm) drop at tip. Operating frequency 50kHz -500KHz, 7 pin Lemo connector, bridge coil configuration.   Model: M7L905-40
U8629539	9403373	Weld Probe, PowerLink Standard Bridge Detachable Weld Probe, 100 kHz - 600 kHz, Right Angle, 5.0 mm ( 0.196 in.) Tip Diameter, Overall length 50.0 mm (1.96 in.), 7 Pin LEMO connector. (WLD90I-5-50-7L
U8690038	9403374	90 degree inline weld surface probe, 100 KHz to 600 KHz, 8.0 mm (0.314 inch) tip diameter, 5.0 mm (0.196 inch) overall length, 7 pin LEMO PowerLink connector. (WLD90I-8-50-7L)
U8633027	9403377	NEC-4039-7L
U8629061	9403383	Right angle surface pencil probe with 7 pin Lemo (PowerLink) connector. Absolute shielded coil operating between 50KHz and 500KHz (200KHz center frequency). 6 inch (15.2cm) overall length with 0.50 inch (12.7mm) drop at probe tip (M7L905-60).
U8626125	9403398	PowerLink Right angle metal shaft surface probe, 4 inch overall length with 0.5 inch drop at tip. Operating frequency 1MHz -6MHz, 7 pin Lemo connector, bridge coil configuration (M7L905-40-1-6M).
U8626126	9403399	PowerLink Right angle metal shaft surface probe, 4 inch overall length with 0.5 inch drop at tip. Operating frequency 200KHz -1MHz, 7 pin Lemo connector, bridge coil configuration (M7L905-40-200K-1M).
U8626127	9403400	Straight metal shaft surface probe, 3 inch (7.6cm) overall length. Operating frequency 1MHz -6MHz,  LEMO 7 pin (PowerLink) connector, bridge coil configuration. Model: M7L-30-1-6M
U8629527	9403403	Bridge Absolute shielded metal shaft 7 Pin LEMO "PowerLink" detachable pencil probe. Operates on a 200 kHz - 1 MHz frequency range and has a center frequency of 500 kHz. Straight shaft with a 0.125 in. diameter tip. 4 in. overall length. (ML/200Khz-1Mhz/A/0.0/4)
U8629528	9403404	Bridge Absolute shielded metal shaft 7 Pin LEMO "PowerLink" detachable pencil probe. Operates on a 1 MHz - 6MHz frequency range and has a center frequency of 2 Mhz. Straight shaft with a 0.125 in. diameter tip. 4 in. overall length. (ML/1Mhz-6Mhz/A/0.0/4)
U8629529	9403405	Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLink", Operates on a 50 kHz - 500 kHz and has a center frequency of 200 kHz, Right Angle Shaft, 0.03 in. (0.76 mm) drop with a 0.125 in. diameter tip. 6 in. overall length.(ML/50Khz)
U8620399	9403406	Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLink", Operates on a 200 kHz - 1 MHz and has a center frequency of 500 kHz, Right Angle Shaft, 0.03 in. (0.76 mm) drop with a 0.125 in. diameter tip. 6 in. overall length.(ML/50Khz)
U8629531	9403408	Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/EMO "PowerLink", Operates on a 200 KHz - 1 MHz and has a center frequency of 500 kHz, Right Angle Shaft, 0.20 in. (5.08 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. (ML/200Khz)
U8629532	9403409	Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLInk", Operates on a 1 MHz - 6 MHz and has a center frequency of 2 MHz, Right Angle Shaft, 0.20 in. (5.08 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. (ML/1Mhz-6Mhz)
U8629533	9403410	Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLink", Operates on a 50 kHz - 500 kHz and has a center frequency of 200 kHz, Right Angle Shaft, 0.50 in. (12.7 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. (ML/50Khz)
U8629534	9403411	Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLink", Operates on a 200 kHz - 1 MHz and has a center frequency of 500 kHz, Right Angle Shaft, 0.50 in. (12.7 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. (ML/200Khz)
U8629535	9403412	Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLInk", Operates on a 1 MHz - 6 MHz and has a center frequency of 2 MHz, Right Angle Shaft, 0.50 in. (12.7 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. (ML/1Mhz-6Mhz/A/90.5/6)
U8629522	9403421
U8629722	9403425	PowerLink forty-five degree angle metal shaft surface probe, 6 inch (15.2cm) overall length with 0.5 inch (12.7cm) drop at tip. Operating frequency 50kHz -500kHz, 7 pin Lemo connector, bridge coil configuration.   Model: M7L455-60
U8629920	9403431
U8629696	9403444	"Right angle metal shaft surface probe, 6 inch (15.2cm) overall length, 0.5 inch (12.7mm) drop and 0.094 inch (2.39mm) diameter at the tip. Operating frequency 200kHz -1MHz,  7 pin Lemo connector, bridge coil configuration.   Model: MY7L905-60FX-200K-1M"
U8629698	9403445	Right angle metal shaft surface probe, 5 inch (12.7cm) overall length with 0.3 inch (7.6mm) drop and 0.072 inch (1.8mm) diameter at tip. Operating frequency 50kHz -500kHz, 7 pin LEMO connector, bridge coil configuration. Model: MM7L903-50
U8629707	9403446
U8610918	9403447
U8610968	9403455	Right angle metal shaft surface probe, 3 inch overall length with 0.2 inch drop and 0.072 inch diameter at tip. Operating frequency 50KHz -500KHz, Lemo 7 pin (PowerLink) connector, bridge coil configuration (MM7L902-30).
U8610972	9403456
U8616150	9403460
U8616151	9403495
Q2500445	9403540	" Right angle metal shaft surface probe, 7 inch (17.7cm) overall length with 0.1 inch (2.5mm) drop at tip. Operating frequency 50kHz -500kHz,  7 pin Lemo (PowerLink) connector, bridge coil configuration.   Model: M7L901-70 "
Q2501135	9403568
U8629327	9522189	Adaptor, LEMO 16 Pin  to  Amphenol 4 Pin,  Bridge Probe Type Model: L16-A4-B and AN16-Z
U8629278	9522205	AH22-BR 12P LEMO To 8 Pin Burndy Adapter
U8767317	9522211	Adaptor, reflection coil configuration probes with 12 Pin LEMO connector to Nortec 500/ 1000 or 2000 instrument (16 Pin LEMO) Model: L16-L12-R & ARN16-H22
U8767318	9522212	Adaptor, bridge coil configuration probes with 12 Pin LEMO connector to Nortec 500/ 1000 or 2000 instrument (16 Pin LEMO) Model: L16-L12-B & AN16-H22
U8767297	9522213	Adaptor, Bridge coil configuration probes with 4 pin Fischer connector to Nortec 500/1000 or 2000 instruments (16 Pin Lemo) Model: L16-F4-B & AN16-Z21
U8779075	9522214	Adaptor, Reflection coil configuration probes with 4 pin Fischer connector to Nortec 500, 600, 1000 or 2000 instruments (16 Pin Lemo) Model: L16-F4-R & ARN16-Z21
U8767166	9522218	Adaptor, LEMO 16 Pin to LEMO 7 Pin, Bridge Probe Type
U8767167	9522219	" Adaptor, LEMO 16 Pin to LEMO 7 Pin, reflection coil configuration probes only.   Formerly P/N ARN16-HLC2 (NDT Engineering). "
U8840093	ACB1-TF-6-1-50K
U8767206	AMF-M-10FX	Straight flex adaptor, Microdot to Microdot connector, 10 inches (25.4cm) long.
U8767209	AMF-MR-8FX
U8600002	BPM-10-TF	Manual hole probe, 0.156 inch (3.9mm) diameter and 1.1 inch (27.9mm) working length. Operating frequency 50kHz -500kHz, triax Fischer/LEMO connector, bridge coil configuration.
U8600003	BPM-12	Manual hole probe, 0.187 inch (4.7mm) diameter and 1.1 inch (27.9mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration.
U8600565	BPM-14-TF
U8600007	BPM-16
U8600566	BPM-18-TF
U8600011	BPM-20	Manual hole probe, 0.312 inch (7.9mm) diameter and 2.0 inch (5.08cm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration.
U8600017	BPM-24	Manual hole probe, 0.375 inch (9.5mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration.
U8600018	BPM-28	Manual hole probe, 0.437 inch (11.1mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration.
U8600022	BPM-32	Manual hole probe, 0.500 inch (12.7mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration.
U8600024	BPM-36	Manual hole probe, 0.562 inch (14.2mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration.
U8600025	BPM-40	Manual hole probe, 0.625 inch (15.8mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration.
U8600459	BPM-44	Manual hole probe, 0.687 inch (17.4mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration.
U8600027	BPM-48	Manual hole probe, 0.750 inch (19.05mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, absolute bridge coil configuration.
U8600029	BPM-52	Manual hole probe, 0.812 inch (20.6mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration.
U8600030	BPM-56	Manual hole probe, 0.875 inch (22.2mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration.
U8600564	BPM-8-TF
U8600571	BPMD-10-TF
U8600573	BPMD-14-TF
U8600570	BPMD-8-TF
U8600804	BPRA-10-SS-1.1WL	Rotary Hole Probe, stainless steel housing for use with RA- 19, RA-2000 and MiniMite Lemo scanner series. 0.156 inch (3.9mm) diameter, 1.1 inch (27.9mm) working length. Operating frequency 100KHz -2MHz, Lemo 4 pin connector, reflection differential coil configuration.
U8250285	BPRA-10-SS-1.5WL
U8614010	BPRA-12-SS	Rotary hole probe, stainless steel housing for use with RA-19, RA-2000 and MiniMite Lemo scanner series. 0.187 inch (4.74mm) diameter, 1.1 inch (27.9mm) working length. Operating frequency 100KHz -2MHz, Lemo 4 pin connector, reflection differential coil configuration.
U8610701	BPRA-14-SS	Rotary hole probe, stainless steel housing for use with RA- 19, RA-2000 and MiniMite Lemo scanner series. 0.218 inch (5.54mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 100KHz -2MHz, Lemo 4 pin connector, reflection differential coil configuration.
U8600434	BPRA-16-SS	Rotary hole probe, stainless steel housing for use with RA- 19, RA-2000 and MiniMite Lemo scanner series. 0.250 inch (6.3mm) diameter and 1.1 inch (27.9mm) working length. Operating frequency 100KHz -2MHz, Lemo 4 pin connector, reflection differential coil configuration.
U8614237	BPRA-20-SS
U8614019	BPRA-40-SS
U8614025	BPRA-8-SS	Rotary hole probe, stainless steel housing for use with RA- 19, RA-2000 and MiniMite Lemo scanner series. 0.125 inch (3.1mm) diameter and 1.1 inch (27.9mm) working length. Operating frequency 100KHz -2MHz, Lemo 4 pin connector, reflection differential coil configuration.
U8614026	BPRAF-10
U8614027	BPRAF-12
U8614252	BPRAF-16
U8610006	BPU-10-SS
U8610022	BPU-14-SS
U8610029	BPU-16-SS	Universal rotary hole probe stainless steel housing, 0.250 inch (6.35mm) diameter, 2.0 inch (5.08cm) working length. Operating frequency 100kHz -2MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8600187	BPU-8-SS
U8610098	BPUF-12
U8600094	BXM-12-16
U8600098	BXM-16-20
U8610146	BXU-12-16	Universal Rotary Hole Probe 0.187 inch (4.7mm) diameter, screw expansion, 2 inch (5.08cm) working length. Operating frequency 100KHz -2MHz, Fischer 4 pin connector, un-shielded reflection differential coil configuration.
U8610151	BXU-16-20	Universal Rotary Hole Probe 0.250 inch (6.3mm) diameter, screw expansion, 2 inch (5.08cm) working length. Operating frequency 100KHz -2MHz, Fischer 4 pin connector, un-shielded reflection differential coil configuration.
U8610152	BXU-20-24	Universal Rotary Hole Probe 0.312 inch (7.9mm) diameter, screw expansion, 2 inch (5.08cm) working length. Operating frequency 100KHz -2MHz, Fischer 4 pin connector, un-shielded reflection differential coil configuration.
U8610153	BXU-24-28	Universal Rotary Hole Probe 0.375 inch (9.52mm) diameter, screw expansion, 2 inch (5.08cm) working length. Operating frequency 100KHz -2MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8610154	BXU-28-32
U8610155	BXU-32-40	Universal Rotary Hole Probe 0.500 inch (12.7mm) diameter, screw expansion, 2 inch (5.08cm) working length. Operating frequency 100KHz -2MHz, Fischer 4 pin connector, un-shielded reflection differential coil configuration.
U8610159	BXU-40-48
U8610160	BXU-48-56
U8614053	BYRA-8-10
U8610182	BYU-12-16-2WL
U8610194	BYU-24-28	Universal Adjustable Hole Probe, 3/8" to 7/16"
U8250276	BYU-88-96
U8270128	CAB-032-OM2_5	32 channels detachable cable for ECA flexible probe FBB-051-500-032, absolute bridge mode, cable length: 2.5M
U8779664	CAB-032-OM5	32 channels detachable cable for ECA flexible probe FBB-051-500-032, absolute bridge mode, cable length: 5M
U8779669	CABR2-030-OM2_5	30 channels detachable cable for ECA flexible probe FBB-051-500-032, Double Reflexion mode, cable length: 2.5M
U8779665	CABR2-030-OM5	30 channels detachable cable for ECA flexible probe FBB-051-500-032, Double Reflexion mode, cable length: 5M
Q7670051	CBAS-10818-0001
Q7670054	CBAS-10821-0001
U8800232	CBM-6	Cable, 6 foot length, Microdot to BNC
U8800241	CBN-TF-6
U8800244	CBR-4SL-6	Cable, 6 foot length, Bridge coil configuration for probes with 4pin step lemo connector to 8 Pin Burndy instruments.
Q8000034	CBR-M-6-1-3M
U8800258	CH22-2M-6	Cable, 6 foot length, Bridge coil configuration for probes with 2 pin Microdot to connect to Hocking Phasec 2200 and Phasec 2s and 2d (12 Pin)
U8800896	CH22-4F-6	Cable, 6 foot length, for Hocking Phasec 2200 or Phasec 2s, 2d or 3d to 4-pin Fischer.
U8690040	CH22-M-6	Cable, 6 foot length, Bridge coil configuration with 12 Pin Lemo connector to Microdot connector for Hocking Phasec 2200 and Phasec 2.
U8800891	CH22-M-6-50-500K	Cable, 6 foot length, absolute coil configuration probes with microdot connector to Phasec/ Locator instrument (12 pin Lemo). Contains internal balance coil to operate probes in the 50KHz-500KHz frequency range.
U8861298	CIRCLETEMPLATE	Circle Template
U8800273	CN16-2M-6	Cable, 6 foot length, Bridge coil configuration, Nortec 16 Pin (Inst) to 2-Pin Microdot-Bridge
U8800275	CN16-4F-6	Cable, 6 foot length,  Bridge coil configuration, Nortec 1000, 2000 and 500 series instruments  (16 pin Lemo) to 4pin Fischer
U8800276	CN16-4L-6	Cable, 6 foot length, Nortec 1000, 2000 and 500 series instruments (16 pin Lemo) to 4 Pin Lemo for Weld Probe (4 Pin LEMO)
U8800278	CN16-M-6-200K-1M	Cable, 6 foot length, Nortec 1000, 2000 and 500 series instruments with  balance coil for probe between 200Khz-1Mhz.
U8800666	CN16-MR-6-50-500K	Cable, 6 foot length, bridge coil configuration probes with single right angle microdot connector to N500 or N2000 instrument (16 pin Lemo). Allows operation of 50kHz-500kHz single pin microdot probes on the Nortec eddy current instruments listed above. Not required for N600 instruments.
U8801390	COS-7L-6	Cable 6 foot length, bridge coil configuration probes with 7 pin Lemo connector to Omniscan instrument (19 pin Lemo).
U8800284	COS-TF-6	Cable adaptor, 6 foot length, connecting an OmniScan (19 pins) to Triax-Fisher probes and cables Wired for differential.
U8800397	CRH22-2M-6	Cable, 6 foot length, 12 Pin Lemo to 2 Pin Microdot  for Hocking Instruments
U8800405	CRN16-2M-6	Cable, 6 foot length, Reflection coil configuration, Nortec 16 Pin (Inst.) to 2 Pin Microdot
U8800814	CRN16-4L-6	Cable 6 foot length, reflection coil configuration probes with 4 pin Lemo connector to N600/N500/N2000 instrument (16 pin Lemo).
U8801083	CRN16-TF-15	Cable, 15 foot (4.5 Meter) length, 16 pin LEMO connector to triax Fischer/LEMO connector, reflection coil configuration.
U8800411	CROS-TF-6	Cable adaptor, 6 foot length, connecting an OmniScan (19 pins) to Triax-Fisher probes and cables Wired for reflection.
U8600132	CSM100-10	Manual rotary 100 degree countersink hole probe with plastic housing, 0.156 inch (3.9mm) diameter pilot. Operating frequency 50kHz -50kHz, microdot connector, bridge absolute coil configuration.
U8600134	CSM100-12	Manual rotary 100 degree countersink hole probe with plastic housing, 0.187 inch (4.7mm) diameter pilot. Operating frequency 50kHz -50kHz, microdot connector, bridge absolute coil configuration
U8600608	CSM100-14	Manual rotary 100 degree countersink hole probe with plastic housing, 0.218 inch (5.1mm) diameter pilot. Operating frequency 50kHz -50kHz, microdot connector, bridge absolute coil configuration.
U8600135	CSM100-16
U8602103	CSRA100-6.35M
U8602101	CSRA100-8.7M
U8602166	CSU100-4.0M-SS	Universal rotary 100 degree countersink hole probe with stainless steel housing, 4.0mm (0.157 inch) diameter pilot. Operating frequency 100KHz -2MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8600979	CSU100-5.0M-SS	Universal rotary 100 degree countersink hole probe with stainless steel housing, 0.196 inch (5.0mm) diameter. Operating frequency 100KHz -2MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8800414	CZ21-2M-6	Cable 6 foot length, reflection coil configuration probes with two single pin microdot connectors to Zetec Miz 21 instrument (4 pin Fischer).
U8800419	CZ21-M-6-50-500K	Cable
U8779886	DGL-AF4-BNC-8	Cable adapter, 8 inch length, 4 pin amphenol female connector to BNC male connector.
Q2700001	E400090A	"Reversed coil order  -ECA flexible surface probe, 51 mm coverage, 500 kHz center frequency, 32 coils      "
U8779368	ENC1-K-ECA	Eddy Current Array Probe encoder with full holder, 2.9 m cable with DE15 connector type
U8800620	EWSX280A	Encoder cable
U8270083	FBB-051-500-032	ECA flexible surface probe, 51 mm coverage, 500 kHz center frequency, 32 coils
Q2700031	FBB051-KIT-FLAT-R2	FlexArray probe kit for flat surface, reflection cable and encoder included
U8270155	FBB051-KIT-PIPE	FlexArray Probe kit detection of SCC on 33.4 mm OD pipe and over
Q2700030	FBB051-KIT-PIPE-R2	FlexArray probe kit detection on 33.4 mm OD pipe and over, reflection cable and encoder included
U8270154	HSB-01	Bond Testing Hand Scanner with cable, and encoder (S-PC-P14 probe NOT included)
U8270153	HSB-SPCP14	Bond Testing Hand Scanner with S-PC-P14 probe, cable, and encoder
Q7670041	HX-ADPT-KIT
U8610458	LP903-50B-1-30K	Low Frequency Probe
U8610459	LP903-50B-TF-1-30K	Low frequency right angle pencil probe with "bent" metal shaft. 0.187 inch (4.7mm) diameter, 5 inch (12.7cm) overall length with 0.3 inch (7.6mm) drop at tip. Frequency range 1kHz-30kHz, bridge coil configuration, triax Fischer/Lemo connector.
U8610461	LP905-40-TF-1-30K	Low Frequency Probe
Q2500823	LPQ-60-TF-1-30K
U8610469	LPQ905-40-TF-1-30K
U8610471	LPQ905-50B-TF-1-30K	Low Frequency Probe
U8610962	LPQ905-50B-TF-30-50K
U8634054	LS042-1
U8634062	LS203-1	Low frequency right angle spot probe, 0.275 inch (6.9mm) diameter with a frequency range of 1kHz-8kHz. Bridge coil configuration, 2 pin microdot connector.
Q6330001	LS204-1-TF
U8633026	LTW1022	Low Frequency Sliding Probe
U8690010	LTW5010-1	Reflection Sliding Probe, Adjustable, 1 kHz to 20 kHz, (2) 1-pin Microdot Connector
Q2500591	MagnaFORM-KIT-MANUAL
Q2500592	MagnaFORM-KIT-SCANNERS
U8270174	MESX320	ECA advanced calibration plate with surface notch, Aluminium
U8779537	MESX321	ECA advanced calibration plate with surface notch, Stainless Steel 316 material
U8616093	ML/100KHZ-500KHZ/A/90.5/6	Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/Lemo "PowerLink". Operates on a 100KHz-500KHz frequency range. Right Angle with a 0.50" drop. Total length of 6 inches (ML/100KHZ-500KHZ/A/90.5/6).
U8620002	MMP-30	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200 kHz. Straight shaft with a 0.072 inch (1.83mm) diameter tip. Total length of 3 inch (76mm).
U8616365	MMP-30-1-3M	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range and has a center frequency of 2MHz. Straight shaft with a 0.072 inch (1.8mm) diameter tip. Total length of 3 inches (7.62cm).
U8616366	MMP-30-200K-1M	Straight metal shaft surface probe, 3 inch (7.6cm) overall length and 0.072 inch (1.8mm) diameter at tip. Operating frequency 200kHz -1MHz,  microdot connector, absolute bridge coil configuration.
U8620006	MMP305-45	Thirty degree angle metal shaft surface probe, 4.5 inch (11.4cm) overall length with 0.5 inch (12.7mm) drop and 0.072 inch (1.8mm) diameter at tip. Operating frequency 50kHz -500kHz,  microdot connector, absolute bridge coil configuration.
U8620009	MMP305-60	Absolute shieleded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz and has a center frequency of 200kHz, 30 degree shaft, 0.5in (12.7mm) drop with a 0.072" (1.83mm) diamerter tip. 6" (152mm) overall length.
U8610623	MMP-30FX
U8616367	MMP-30FX-1-3M
U8620010	MMP-40	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200 kHz. Straight shaft with a 0.072" (1.83mm) diameter tip. Total length of 4" (102mm).
U8616153	MMP-40FX
U8616154	MMP-40FX-200K-1M
U8620280	MMP455-40	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200 kHz. Forty-five degree angle shaft with a 0.50" (12.7mm)  drop and a 0.072" (1.83mm) diameter tip. Total length of 4" (102mm).
U8620443	MMP455-40-6M	Absolute shielded metal shaft microdot detachable pencil probe. Operates at a frequency of 6MHz . Forty-five degree angle shaft with a 0.50 inch (12.7mm) drop and a 0.072 inch (1.83mm) diameter tip. Total length of 4 inches (102mm).
U8620302	MMP-60	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200 kHz. Straight shaft with a 0.072" (1.83mm) diameter tip. Total length of 6" (152mm).
U8620016	MMP-60-1-3M
U8620017	MMP-60FX	Absolute shielded flexible metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Straight shaft with a 0.072" (1.83mm) diameter tip. Total length of 6" (152mm).
U8616344	MMP9003-60FX	Absolute shielded "flexible" metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.03 inch (0.76mm) drop and a 0.072 inch (1.8mm) diameter tip. Total length of 6 inches (15.2cm).
U8620021	MMP902-40	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center of 200kHz. Right angle shaft with a 0.20 (5.08mm)" drop and a 0.072 diameter tip. Total length of 4" (102mm).
U8620278	MMP902-40-1-3M
U8620415	MMP902-50FX	Absolute shielded flexible metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center of 200kHz. Right angle shaft with a 0.20 (5.08mm)" drop and a 0.072 diameter tip. Total length of 5" (203mm).
U8620027	MMP902-60	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center of 200kHz. Right angle shaft with a 0.20 (5.08mm)" drop and a 0.072 diameter tip. Total length of 6" (152mm).
U8620385	MMP903-60
U8620376	MMP905-30	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200 kHz. Right angle shaft with a 0.50" (12.7mm) drop and a 0.072" (1.83mm) diameter tip. Total length of 3" (76mm).
U8620034	MMP905-40	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200 kHz. Right angle shaft with a 0.50" (12.7mm) drop and a 0.072" (1.83mm) diameter tip. Total length of 4" (102mm).
U8616361	MMP905-60-200K-1M	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 200kHz-1MHz frequency range and has a center frequency of 500kHz. Right angle shaft with a 0.5 inch (12.7mm) drop and a 0.072 inch (1.8mm) diameter tip. Total length of 6 inches (15.2cm).
U8629993	MMP905-60B	Absolute shielded "bent" metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.50 inch (12.7mm) drop and a 0.072 inch (1.82mm) diameter tip. Total length of 6 inches (15.2cm).
U8623013	MMTF305-40	Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Thirty degree angle shaft with a 0.5 inch drop and a 0.072 inch diameter tip. Total length of 4.0 inches.
U8623016	MMTF305-50	Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Thirty degree angle shaft with a 0.5 inch drop and a 0.072 inch diameter tip. Total length of 5.0 inches.
U8623019	MMTF-40	Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Straight shaft with a 0.072 inch diameter tip. Total length of 4.0 inches.
U8623239	MMTF-40-200K-1M	Bridge shielded metal shaft triax Fischer/Lemo detachable pencil probe. Operates on a 200kHz-1MHz frequency range and has a center frequency of 500 kHz. Straight shaft with a 0.072 inch (1.8mm) diameter tip. Total length of 4 inches (10.1cm).
U8616427	MMTF455-40-200K-1M
U8610624	MMTF455-60	Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Forty-five degree angle shaft with a 0.5 inch drop and a 0.072 inch diameter tip. Total length of 6.0 inches.
U8616415	MMTF901-60FX	Right angle "flexible" metal shaft surface probe with 0.072 inch (1.8mm) diameter probe tip. 10 inch (25.4cm) overall length with 0.10 inch (2.54mm) drop at tip. Operating frequency 50KHz -500KHz, Fischer/Lemo triax connector, bridge coil configuration.
U8623240	MMTF902-40	Right angle metal shaft surface probe, 4 inch (10.1cm) overall length with 0.2 inch (5.08mm) drop and 0.072 inch (1.8mm) diameter tip. Operating frequency 50kHz -500kHz,  triax Fischer\Lemo connector, bridge coil configuration.
U8616417	MMTF902-40B
U8620340	MMTF902-50FX-200K-1M	Right angle "flexible" metal shaft surface probe, 5 inch (12.7cm) overall length with 0.2 inch (5.08mm) drop and 0.072 inch (1.83mm) diameter at tip. Operating frequency 200kHz -1MHz (500KHz center frequency), Fischer/Lemo triax connector, bridge coil configuration.
U8614311	MMTF902-60-1-6M
U8623242	MMTF905-40
U8623322	MMTF905-40-1-6M
U8623033	MMTF905-60	Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.5 inch drop and a 0.072 inch diameter tip. Total length of 6.0 inches.
U8610492	MMTF905-60-1-6M	Right angle metal shaft surface probe, 6 inch (15.2cm) overall length with 0.5 inch (12.7mm) drop and 0.072 inch (1.8mm) diameter tip. Operating frequency 1MHz -6MHz,  triax Fischer\LEMO connector, bridge coil configuration.
U8250184	MMTF905-60-200K-1M	Absolute shielded metal shaft triax Fischer/Lemo detachable pencil probe. Operates on a 200kHz-1MHz frequency range and has a center frequency of 500 kHz. Right angle shaft with a 0.50 inch (12.70mm) drop and a 0.072 inch (1.82mm) diameter tip. Total length of 6 inches..
U8620303	MP.045-60BL	Absolute shielded metal shaft microdot detachable blade probe with a surface of .045. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Straight shaft with a 0.125" (3.18mm) diameter tip. Total length of 6" (152mm).
U8620047	MP-10	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Straight shaft with 0.125" (3.18mm) diameter tip. Total length 1 inches.
U8610997	MP10B15-9003-60-200K-1M
U8620052	MP-20	Straight metal shaft surface probe, 2 inch (5.08cm) overall length. Operating frequency 50kHz -500kHz,  microdot connector, absolute bridge coil configuration.
U8620342	MP-20-200K-1M	Straight metal shaft surface probe, 2 inch (5.08cm) overall length. Operating frequency 200kHz -1MHz,  microdot connector, absolute bridge coil configuration.
U8620053	MP-30	Straight metal shaft surface probe, 3 inch (7.6cm) overall length. Operating frequency 50kHz -500kHz,  microdot connector, absolute bridge coil configuration.
U8620055	MP-30-1-3M	Straight metal shaft surface probe, 3 inch (7.6cm) overall length. Operating frequency 1MHz -3MHz,  microdot connector, absolute bridge coil configuration.
U8616291	MP302-60
U8620059	MP305-40	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz and has a center frequency of 200kHz. 30 degree shaft, .50in (12.7mm) drop with a 0.125" (3.18mm) (3.18mm) diameter tip. 4" (102mm) overall length.
U8616288	MP305-50-1-3M
U8620312	MP305-50-200K-1M
U8620062	MP305-60
U8610715	MP305-60-1-3M
U8620067	MP-40	Straight metal shaft surface probe, 4 inch (10.1cm) overall length. Operating frequency 50kHz -500kHz,  microdot connector, absolute bridge coil configuration.
U8620068	MP-40-1-3M	Straight metal shaft surface probe, 4 inch (10.1cm) overall length. Operating frequency 1MHz -3MHz,  microdot connector, absolute bridge coil configuration.
U8620069	MP-40-200K-1M	Straight metal shaft surface probe, 4 inch (10.1cm) overall length. Operating frequency 200kHz -1MHz,  microdot connector, absolute bridge coil configuration.
U8610891	MP-40FX-1-3M
U8610837	MP-45	Straight metal shaft surface probe, 4.5 inch (11.4cm) overall length. Operating frequency 50kHz -500kHz,  microdot connector, absolute bridge coil configuration.
U8616298	MP4510-40
U8620076	MP-45-1-3M	Straight metal shaft surface probe, 4.5 inch (11.4cm) overall length. Operating frequency 1MHz -3MHz,  microdot connector, absolute bridge coil configuration.
U8620079	MP453-40-1-3M
U8610767	MP453-45	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz and has a center frequency of 200kHz. 45 degree shaft, 0.3" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. 4.5" (114mm) overall length.
Q2500718	MP453-45-1-3M	Forty-five degree angle metal shaft surface probe, 4.5 inch (11.4cm) overall length with 0.3 inch (7.6mm) drop at tip. Operating frequency 1MHz -3MHz,  microdot connector, absolute bridge coil configuration.
U8623373	MP453-60-1-3M	Forty-five degree angle metal shaft surface probe, 6 inch (15.2cm) overall length with 0.3 inch (7.6mm) drop and 0.072 inch (1.8mm) diameter at tip. Operating frequency 1MHz -3MHz,  microdot connector, absolute bridge coil configuration.
U8629678	MP453-60-200K-1M	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 200KHz-1MHz frequency range and has a center frequency of 500 KHz. 45 degree angle shaft with a 0.30"  drop and a 0.072" (1.83mm) diameter tip. Total length of 6" (152mm).
U8610497	MP455-120FX-200K-1M
U8616295	MP455-30-1-3M
U8620086	MP455-40	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Forty-Five degree angle shaft with a 0.50" drop and a 0.125" (3.18mm) diameter tip. Total length of 4" (102mm).
U8620087	MP455-40-1-3M	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range and has a center frequency of 2MHz. Forty-Five degree angle shaft with a 0.50" drop and a 0.125" (3.18mm) diameter tip. Total length of 4" (102mm).
U8620088	MP455-40C	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Forty-Five degree angle shaft with a 0.50" curved drop and a 0.125" (3.18mm) diameter tip. Total length of 4" (102mm).
U8620089	MP455-45	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Forty-Five degree angle shaft with a 0.50" drop and a 0.125" (3.18mm) diameter tip. Total length of 4.5" (114mm).
U8620090	MP455-45-1-3M	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range and has a center frequency of 2MHz. Forty-Five degree angle shaft with a 0.50" drop and a 0.125" (3.18mm) diameter tip. Total length of 4.5" (114mm).
U8620094	MP455-50	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Forty-Five degree angle shaft with a 0.50" drop and a 0.125" (3.18mm) diameter tip. Total length of 5" (127mm).
U8620346	MP455-50-1-3M
U8629762	MP455-50-200K-1M
U8620095	MP455-50C
U8620097	MP455-60	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Forty-Five degree angle shaft with a 0.50" drop and a 0.125" (3.18mm) diameter tip. Total length of 6" (152mm).
U8620099	MP455-60C	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Forty-Five degree angle shaft with a 0.50" curved drop and a 0.125" (3.18mm) diameter tip. Total length of 6" (152mm).
U8620106	MP457-60	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Forty-Five degree angle shaft with a 0.70" drop and a 0.125" (3.18mm) diameter tip. Total length of 6" (152mm).
U8620108	MP-50	Straight metal shaft surface probe, 5 inch (12.7cm) overall length. Operating frequency 50kHz -500kHz,  microdot connector, absolute bridge coil configuration
U8620403	MP-50-200K-1M
U8610632	MP-60-200K-1M	Straight metal shaft surface probe, 6.0 inch (15.2cm) overall length. Operating frequency 200kHz -1MHz,  microdot connector, absolute bridge coil configuration.
U8620114	MP-60FX	Straight flexible metal shaft surface probe, 6.0 inch (15.2cm) overall length. Operating frequency 50kHz -500kHz,  microdot connector, absolute bridge coil configuration.
U8620115	MP-60FX-1-3M	Straight flexible metal shaft surface probe, 6.0 inch (15.2cm) overall length. Operating frequency 1MHz -3MHz,  microdot connector, absolute bridge coil configuration.
U8616209	MP9003-50B
U8620348	MP9003-60	Right angle metal shaft surface probe, 6 in. overall length and 0.03 in. drop at tip. Operating frequency 50 kHz - 500 kHz, microdot connector, absolute bridge coil configuration.
U8620398	MP9003-60-1-3M	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 1 MHz - 3 MHz frequency range and has a center frequency of 2 MHz. Right Angle Shaft, 0.03 in. (0.76 mm) drop with a 0.125 in. diameter tip. 6 in. overall length.
U8620397	MP9003-60-200K-1M	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 200 kHz - 1 MHz frequency range and has a center frequency of 500 kHz. Right Angle Shaft, 0.03 in. (0.76 mm) drop with a 0.125 in. diameter tip. 6 in. overall length.
U8620142	MP901-40
U8620144	MP901-40FX	Absolute shielded flexible metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range  and has a center frequency of 200kHz. Right angle shaft with a 0.10" drop with a 0.125" (3.18mm) diameter tip. Total length of 4" (102mm).
U8616211	MP901-50-1-3M	Right angle metal shaft surface probe, 5 inch (12.7mm) overall length with 0.1 inch (2.5mm) drop at tip. Operating frequency 1MHz -3MHz,  microdot connector, absolute bridge coil configuration.
U8620147	MP901-60	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range  and has a center frequency of 200kHz. Right angle shaft with a 0.10" drop with a 0.125" (3.18mm) diameter tip. Total length of 6" (152mm).
U8610505	MP901-60B
U8616269	MP902-100FX-1-3M	Absolute shielded "flexible" metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range and has a center frequency of 2MHz. Right angle shaft with a 0.20 inch (5.08mm) drop with a 0.125 inch (3.18mm) diameter tip. Total length of 10 inches (25.4cm).
U8616270	MP902-100FX-200K-1M	Right angle flexible metal shaft surface probe, 10 inch (25.4cm) overall length with 0.2 inch (5.08mm) drop at tip. Operating frequency 200kHz -1MHz,  microdot connector, absolute bridge coil configuration.
U8620157	MP902-40-1-3M	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range  and has a center frequency of 2MHz. Right angle shaft with a 0.20 (5.08mm)" drop with a 0.125" (3.18mm) diameter tip. Total length of 4" (102mm).
U8620160	MP902-40FX	Absolute shielded flexible metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range  and has a center frequency of 200kHz. Right angle shaft with a 0.20 (5.08mm)" drop with a 0.125" (3.18mm) diameter tip. Total length of 4" (102mm).
U8616199	MP902-40FX-1-3M	Absolute shielded "flexible" metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range and has a center frequency of 2MHz. Right angle shaft with a 0.20 inch (5.08mm) drop with a 0.125 inch (3.18mm) diameter tip. Total length of 4 inches (10.1cm).
U8620317	MP902-45-1-3M
U8620162	MP902-45FX	Absolute shielded flexible metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range  and has a center frequency of 200kHz. Right angle shaft with a 0.20 (5.08mm)" drop with a 0.125" (3.18mm) diameter tip. Total length of 4.5" (114mm).
U8610508	MP902-50-200K-1M
U8620164	MP902-50B	Absolute shielded metal shaft microdot detachable pencil probe with bent handle. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.2 inch (5.08mm) drop with a 0.125 inch (3.18mm) diameter tip. Total length of 5 inches (127mm).
U8620165	MP902-50B-1-3M	Right angle bent metal shaft surface probe, 5 inch (12.7cm) overall length with 0.2 inch (5.08mm) drop at tip. Operating frequency 1MHz -3MHz,  microdot connector, absolute bridge coil configuration.
U8620167	MP902-60	Surface Probe, 50 kHz to 500 kHz, 200 kHz center frequency, Right Angle Shaft, 0.20 in. (5.08 mm) drop with a 0.125 in. (3.18 mm) tip diameter, 152 mm (6 in.) length, Microdot Connector
U8620168	MP902-60-1-3M	Surface Probe, 1 MHz - 3 MHz, 2 MHz center frequency, Right Angle Shaft, 0.20 in. (5.08 mm) Drop, 0.125 in. (3.18 mm) tip diameter, 152 mm (6 in.) length, Microdot Connector
U8620401	MP902-60-200K-1M	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 200 kHz - 1 MHz frequency range and has a center frequency of 500 kHz. Right Angle Shaft, 0.20 in. (5.08 mm) drop with a 0.125 in. diameter tip. 6 in. overall length.
U8620373	MP902-60B-1-3M	Right angle bent metal shaft surface probe, 6 inch (15.2cm) overall length with 0.2 inch (5.08mm) drop at tip. Operating frequency 1MHz -3MHz,  microdot connector, absolute bridge coil configuration.
U8620170	MP902-60FX	Absolute shielded flexible metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range  and has a center frequency of 200kHz. Right angle shaft with a 0.20 (5.08mm)" drop with a 0.125" (3.18mm) diameter tip. Total length of 6" (152mm).
U8620426	MP903-50-1-3M	Right angle metal shaft surface probe, 5 inch (12.7cm) overall length with 0.3 inch (7.6mm) drop at tip. Operating frequency 1MHz -3MHz,  microdot connector, absolute bridge coil configuration.
U8620184	MP905-120	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range  and has a center frequency of 200kHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 12" (305mm).
U8620186	MP905-30	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range  and has a center frequency of 200kHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 3" (76mm).
U8616185	MP905-30-1-3M	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range and has a center frequency of 2MHz. Right angle shaft with a 0.50 inch (12.7mm) drop with a 0.125 inch (3.18mm) diameter tip. Total length of 3 inches (76mm).
U8610514	MP905-30-200K-1M	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 200kHz-1MHz frequency range  and has a center frequency of 500kHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 3" (76mm).
U8620188	MP905-40	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range  and has a center frequency of 200kHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 4" (102mm).
U8620189	MP905-40-1-3M	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range  and has a center frequency of 2MHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 4" (102mm).
U8610515	MP905-40B	Absolute shielded metal shaft microdot detachable pencil probe with bent handle. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.50 inch (12.7mm) drop with a 0.125 inch (3.18mm) diameter tip. Total length of 4 inches (102mm).
U8620193	MP905-45-200K-1M
U8620196	MP905-50	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range  and has a center frequency of 200kHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 5" (127mm).
U8620197	MP905-50-1-3M	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range  and has a center frequency of 2MHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 5" (127mm).
U8610516	MP905-50-200K-1M
U8620198	MP905-50B	Absolute shielded metal shaft microdot detachable pencil probe bent handle. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.50 inch (12.7mm) drop with a 0.125 inc (3.18mm) diameter tip. Total length of 5 inches (127mm).
U8610859	MP905-50B-1-3M	Absolute shielded "bent" metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range and has a center frequency of 2MHz. Right angle shaft with a 0.50 inch (12.7mm) drop and a total length of 5 inches (12.7cm).
U8620199	MP905-50FX
U8620200	MP905-60	Surface Probe, 50 kHz to 500 kHz, 200 kHz center frequency, Right Angle Shaft, 0.50 in. (12.7 mm) Drop, 0.125 in. (3.18mm) tip diameter, 152 mm (6 in.) length, Microdot Connector
U8610518	MP905-60-200K-1M	Surface Probe, detachable metal right angle shaft, 200 kHz - 1 MHz frequency range, 500 kHz center frequency, 0.50 in. (12.7 mm) drop, 152 mm (6 in.) overall length, Mircodot Connector
U8620203	MP905-60B	Absolute shielded metal shaft microdot detachable pencil probe bent handle. Operates on a 50kHz-500kHz frequency range  and has a center frequency of 200kHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 6" (152mm).
U8620337	MP905-70	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range  and has a center frequency of 200kHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 7" (178mm).
U8620209	MP905-80	Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range  and has a center frequency of 200kHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 8" (203mm).
U8620427	MP907-60	Right angle metal shaft surface probe, 6 inch (15.2cm) overall length with 0.7 inch (17.7mm) drop at tip. Operating frequency 50kHz -500kHz,  microdot connector, absolute bridge coil configuration.
U8620224	MT-30-50K	Straight metal shaft surface probe, 3 inch (7.6cm) overall length with 0.187 inch (4.7mm) diameter shaft. Operating frequency 50kHz,  triax Fischer/Lemo connector, bridge coil configuration.
U8623035	MTF-30	Surface Probe, Straight, 3" L. Shlded
U8623036	MTF-30-1-6M	2 MHz Surface Probe
U8623362	MTF302-60
U8623251	MTF305-30	30 degree angle metal shaft shielded probe, Triaxial Fischer connector, 1/8" (3.1mm) diameter X 3" (76.2mm) long with a 1/2" (12.6mm) drop at the probe tip. Operating frequency of 50 KHz-500 KHz.
U8610529	MTF305-40	30 degree angle metal shaft shielded probe, Triaxial Fischer connector, 1/8" (3.1mm) diameter X 4" (101.5mm) long with a 1/2" (12.6mm) drop at the probe tip. Operating frequency of 50 KHz-500 KHz.
U8623338	MTF305-60	Thirty degree angle metal shaft surface probe, 6 inch overall length with 0.5 inch drop at tip. Operating frequency 50KHz -500KHz, Fischer/Lemo triax connector, bridge coil configuration.
U8623038	MTF-40	Surface Probe, 50 kHz to 500 kHz, Straight Probe, 101 mm (4in.) length, Triax Fischer/LEMO Connector
U8623039	MTF-40-1-6M	Surface Probe, 1 MHz - 6 MHz, 2 MHz, Straight Probe, 101 mm (4 in.) length, Triax Fischer/LEMO Connector
U8629752	MTF-40FX-1-6M
U8610530	MTF453-30	Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Forty-five degree angle shaft with a 0.30 inch drop and a total length of 3.0 inches.
U8623045	MTF453-40	Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Forty-five degree angle shaft with a 0.30 inch drop and a total length of 4.0 inches.
U8620274	MTF455-30	HFEC Surface Probe, 45 Deg .50 Drop Bridge 50-500KHZ Frequency
U8623050	MTF455-40	Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Forty-five degree angle shaft with a 0.50 inch drop and a total length of 4.0 inches.
U8623313	MTF-50-1-6M	Straight metal shaft surface probe, 5 inch (12.7cm) overall length. Operating frequency 1MHz -6MHz,  triax Fischer/Lemo connector, bridge coil configuration.
U8623060	MTF-60-1-6M	Straight metal shaft surface probe, 6 inch (15.2cm) overall length. Operating frequency 1MHz -6MHz,  triax Fischer/Lemo connector, bridge coil configuration.
U8623065	MTF9002-70FX	Triax Fischer/Lemo detachable "flexible" metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.02 inch drop and a total length of 7.0 inches.
U8250091	MTF9003-50FX	Triax Fischer/Lemo detachable Flexible metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.03 inch drop and a total length of 5.0 inches.
U8623070	MTF9003-60	Surface Probe, 50 kHz to 500 kHz, Right Angle Shaft 0.03 in. (0.76 mm) Drop, 152 mm (6 in.) length, Triax Fischer/LEMO Connector
U8610773	MTF9003-60-1-6M	Bridge Absolute shielded metal shaft Triax Lemo/Fischer detachable pencil probe. Operates on a 1MHz-6MHz frequency range. Right Angle Shaft, 0.03in. (0.76mm) drop with a 0.125" diameter tip. 6 inch overall length.
U8623071	MTF9003-60FX	Right angle flexible metal shaft surface probe, 6 inch (15.2cm) overall length with 0.03 inch (0.76mm) drop at tip. Operating frequency 50kHz -500kHz,  triax Fischer/Lemo connector, bridge coil configuration.
U8610540	MTF9010-50FX
U8610711	MTF901-50	Right angle metal shaft surface probe, 5 inch overall length with 0.1 inch drop at tip. Operating frequency 50KHz - 500KHz, Fischer/Lemo triax connector, bridge coil configuration.
U8623074	MTF901-60	Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.10 inch drop and a total length of 6.0 inches.
U8623081	MTF902-50	Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.20 inch drop and a total length of 5.0 inches.
U8623083	MTF902-60	Surface Probe, 50 kHz to 500 kHz, Right Angle Shaft, 0.20 in. (5.08 mm) Drop, 152 mm (6 in.) length, Triax Fischer/LEMO Connector
U8623084	MTF902-60-1-6M	Surface Probe, 1 MHz to 6 MHz, Right Angle Shaft, 0.20 in. (5.08 mm) Drop, 152 mm (6 in.) length, Triax Fischer/LEMO Connector
U8623086	MTF902-60B	Triax Fischer/Lemo detachable "bent" metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.20 inch drop and a total length of 6.0 inches.
U8623326	MTF903-45-1-6M
U8600960	MTF903-50B-1-6M	Right angle bent metal shaft surface probe, 5 inch (12.7cm) overall length with 0.3 inch (7.6mm) drop at tip. Operating frequency 1MHz -6MHz,  triax Fischer/Lemo connector, bridge coil configuration.
U8623106	MTF905-50	Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.50 inch drop and a total length of 5.0 inches.
U8620272	MTF905-50-1-6M	Right angle metal shaft surface probe, 5 inch (12.7cm) overall length with 0.5 inch (12.7mm) drop at tip. Operating frequency 1MHz -6MHz,  triax Fischer/Lemo connector, bridge coil configuration.
U8623108	MTF905-60	Surface Probe, 50 kHz to 500 kHz, Right Angle Shaft, 0.50 in. (12.7 mm) Drop, 152 mm (6 in.) length, Triax Fischer/LEMO Connector
U8623113	MTF905-60FX	Triax Fischer/Lemo detachable "flexible" metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.50 inch drop and a total length of 6.0 inches.
U8610973	MTF905-60FX-1-6M
U8623263	MTF905-60FX-200K-1M
U8623131	MXTF-40	Absolute shielded metal shaft Triax Fischer/Lemo detachable pencil probe. Operates on a 50kHz - 500kHZ frequency range and has a center frequency of 200kHz. Straight shaft with 0.050 inch (12.7mm) diameter tip. Total length of 4 inches (10.2cm).
U8623134	MXTF902-40B	Triax Fischer/Lemo detachable metal shaft "bent" pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.2 inch drop and a 0.050 inch diameter tip. Total length of 4.0 inches.
Q2500219	MZTF-40
U8623368	MZTF905-60	Right angle metal shaft surface probe, 6 inch (15.2cm) overall length with 0.5 inch (12.7mm) drop and 0.062 (1.57mm) diameter at tip. Operating frequency 50kHz -500kHz,  triax Fischer/Lemo connector, bridge coil configuration.
U8860784	NDT1087-P1
U8862446	NDT3141G1
U8630015	NEC-1005
U8680002	NEC-1006	Special Purpose Eddy Current Probe lap joint inspection
U8610552	NEC-1016-1	Special purpose right angle eddy current probe, bridge coil configuration operating with a frequency range of 25kHz-100kHz, triax Fischer/Lemo connector.
U8610556	NEC-1058	Surface Probe
U8633002	NEC-1059	Low Frequency Probe,
U8610403	NEC-1062	Special purpose right angle metal shaft surface probe, 8 inch (20.3cm) overall length with 0.25 inch (6.3mm) drop at tip. Operating frequency 25kHz -200kHz,  triax Fischer/LEMO connector, bridge coil configuration.
U8861313	NEC-1062G	MP Probe Guide L&R Side.
U8610558	NEC-1083	Special Purpose Eddy Current Probe
U8680003	NEC-1084	Special Purpose Eddy Current Probe
U8630018	NEC-1087	Special purpose right angle spot probe. 0.25 inch diameter (6.3mm), aluminum balanced reflection coil configuration, triax Fischer/LEMO connector.
U8610561	NEC-1089	Special Purpose Eddy Current Probe
U8633062	NEC-1108	Special purpose chem. mill sliding probe. Reflection coil configuration, triax Fischer/Lemo connector. Operating frequency range 1KHz-50KHz.
U8610744	NEC-2017
U8680089	NEC-2052	Special purpose eddy current surface probe, right angle metal shaft probe, 11 inches overall length with 0.05 inch drop at tip. Triax Fischer/ Lemo connector, bridge coil configuration with operating frequency of 50KHz-500KHz.
U8610570	NEC-2078	Special Purpose Probe, Equiv to 2-832-02-2455
U8629544	NEC-2236-TF
U8600304	NEC-3006
U8600305	NEC-3007
U8600079	NEC-3014
U8600080	NEC-3015
U8600081	NEC-3016
U8600307	NEC-3035
U8600309	NEC-3036
U8629069	NEC-3039
U8600083	NEC-3078-.73-.79
U8600328	NEC-3129-48-56	Special purpose manual bolt hole probe ("Y"? style), 1 MHz to 3 MHz, 4 Pin Fischer connector, 0.750 Inch (19.05mm) to 0.875 (22.23mm).
U8600329	NEC-3129-56-64	Special purpose manual bolt hole probe ("Y"? style), 1 MHz to 3 MHz, 4 Pin Fischer connector, 0.875 Inch (22.23mm) to 1.00 (25.40mm).
U8600330	NEC-3129-EXT	Special Purpose Eddy Current Probe
U8636056	NEC-4028-2	Ring probe, 0.5 inch (12.7mm) ID X 1.0 inch (25.4mm) OD. Reflection oil configuration, triax Fischer/LEMO connector.
U8636081	NEC-4028-3
U8630029	NEC-4031	Low frequency surface/spot probe, reflection coil configuration operating between 800Hz-30KHz, 4 pin Fischer connector.
U8634085	NEC-4033-TF	Special purpose eddy current spot probe. 0.62 inch (15.7mm) diameter X 1.6 inch (4.06cm) tall. Reflection coil configuration operating at 1-30kHz, right angle triax Fischer/LEMO connector.
U8636053	NEC-4039	Reflection Sliding Probe, Fixed, 1 kHz - 100 kHz, 25.4 mm (1.00 in.) x 38.1 mm (1.50 in.) x 20.3 mm (0.80 in.), Fischer/LEMO Triax Connector
U8633021	NEC-4083	Low Frequency Probe
U8630017	NEC-4088-1	Special Purpose Low Frequency Probe
U8639004	NEC-4170	Low Frequency Probe
U8670016	NEC-8196
U8670018	NEC-8196L
U8670135	NEC-8196-TF
U8779469	OMNI-A-OBTC	Bond Testing C-Scan Adaption kit for OmniScan ECT/ECA includes MXB software and adaptor for Pitch-Catch BondMaster probe
U8767054	RAU-RA	Bolt hole probe adaptor, universal probe (4 pin Fischer) to Rechii RA probe (4 pin LEMO).
U8767055	RAU-U-12FX	Flex shaft scanner extension, universal probe (4 pin Fischer) to Spitfire or MiniMite Fischer scanner (4 pin Fischer). 12 inch (30.4cm) long.
U8634002	RR0110-1-TF	Reflection Ring Probe, triax fischer/lemo connector, operating frequency 50Hz-3KHZ, 0.50 inch (12.7mm) ID X 1.09  inch (27.6mm) OD
U8636011	RR0110-5-TF	Reflection Ring Probe, triax fischer/lemo connector, operating frequency 50Hz-3KHZ, 0.50 inch (12.7mm) ID X 1.00 inch (25.4mm) OD
U8636012	RR0111-1-TF	Reflection Ring Probe, triax fischer/lemo connector, operating frequency 50Hz-3KHZ, 0.53 inch (13.4mm) ID X 1.10 inch (27.9mm) OD
U8636016	RR0112-2	Reflection Ring Probe, 2-pin microdot connector, operating frequency 50Hz-3KHZ, 0.60 inch (15.23mm) ID X 1.25 inch (31.75mm) OD
U8636018	RR0112-5-TF	Reflection Ring Probe, triax fischer/lemo connector, operating frequency 50Hz-3KHZ, 0.60 inch (15.23mm) ID X 1.16  inch (29.46mm) OD
U8636026	RR017-1-TF
U8636027	RR018-5-TF	Reflection Ring Probe, triax fischer/lemo connector, operating frequency 50Hz-3KHZ, 0.40 (10.16mm) ID X .80 inch (20.32mm) OD
U8636031	RR019-5-TF	Reflection Ring Probe, triax fischer/lemo connector, operating frequency 80Hz-4KHz, 0.450 inch (11.43mm) ID X 0.900 inch (22.86mm) OD
U8629109	RR026-1
U8636039	RR058-1	Reflection Ring Probe, 2-pin microdot connector, operating frequeny 200Hz-10KHz, 0.300 inch (7.61mm) ID x 0.815 inch (20.7mm) OD
U8636040	RR058-1-TF	Reflection Ring Probe, triax fischer/lemo connector, operating frequeny 200Hz-10KHz, 0.300 inch (7.61mm) ID x 0.815 inch (20.7mm) OD
U8636100	RR2007-1
Q6360011	RR207-1
U8630024	RS1005-2-TF	Corrosion Probe, TF Conn.
U8634026	RS1005-5-TF	Low Frequency Probe, triax fischer
U8634137	RS204-2-TF	Spot probe, 0.425 inch (10.8mm) diameter. Operating frequency 500Hz -15kHz, triax Fischer/Lemo connector, reflection coil configuration.
U8270003	SAA-112-005-032	ECA Semi-Rigid probe, TX-RX mode, 112 mm coverage, 1 - 25 kHz, 32 elements, 3-m cable.
U8270004	SAAR-051-100-032	ECA Rigid probe, TX-RX mode, 51.2 mm coverage, 20 - 500 kHz, 32 elements, 3-m cable.
U8270093	SAB-064-030-032	ECA Semi-Rigid probe for subsurface crack detection, TX-RX mode double resolution, 64 mm coverage, 4 kHz to 225 kHz, 32 elements, 2.4 m cable, with ENC1-K-ECA encoder mounted
U8270006	SAB-067-005-032	ECA Semi-Rigid probe, TX-RX mode double resolution, 67.2 mm coverage, 1 - 25 kHz, 32 elements, 3-m cable
U8270163	SAB067-ENC	ECA Semi-Rigid probe, shielded TX-RX mode double resolution, 67.2 mm coverage, 1 - 25 kHz, 32 elements, 3m cable. This is a factory-assembled probe kit, ready to use, consisting of a SAB-067-005-032, and ENC1-K-ECA encoder
U8270008	SBB-051-150-032	ECA Semi-Rigid probe, ABS mode, 51.2 mm coverage, 50 - 500 kHz, 32 elements, 3-m cable.
Q2500841	SBBR026-ENC
U8609344	SEU-10.2-35
U8609345	SEU-10.3-35	Universal Rotary Hole Probe 10.3mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609347	SEU-11.0-35
U8609350	SEU-11.4-35	Universal Rotary Hole Probe 11.4mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609353	SEU-11.8-35
U8609354	SEU-11.9-35	Universal Rotary Hole Probe 11.9mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609355	SEU-12.3-35	Universal Rotary Hole Probe 12.3mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8602084	SEU-12.6-35	Universal Rotary Hole Probe 12.6mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609356	SEU-12.7-35	Universal Rotary Hole Probe 12.7mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
Q6090037	SEU-13.5-50	Universal Rotary Hole Probe 13.5mm diameter, Stainless Steel fixed diameter with 50mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609369	SEU-13.9-35	Universal Rotary Hole Probe 13.9mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8602087	SEU-14.2-35
U8602090	SEU-15.8-35
U8609363	SEU-15.9-35
U8609372	SEU-17.5-35
U8609374	SEU-18.3-35
U8609376	SEU-19.1-35
U8609380	SEU-20.6-35
U8609392	SEU-25.4-35
U8602076	SEU-3.0-35	Universal Rotary Hole Probe 3.0mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609315	SEU-3.1-35	Universal Rotary Hole Probe 3.1mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
Q6000004	SEU-3.2-35
U8609316	SEU-3.5-35	Universal Rotary Hole Probe 3.5mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8602077	SEU-3.6-35	Universal Rotary Hole Probe 3.6mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609317	SEU-3.9-35	Universal Rotary Hole Probe 3.9mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
Q6020035	SEU-4.0-35	Universal Rotary Hole Probe 4.0mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8602078	SEU-4.2-35	Universal Rotary Hole Probe 4.2mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609318	SEU-4.3-35	Universal Rotary Hole Probe 4.3mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
Q2501117	SEU-4.5-35
U8609319	SEU-4.7-35	Universal Rotary Hole Probe 4.7mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609320	SEU-5.0-35	Universal Rotary Hole Probe 5.0mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609321	SEU-5.1-35	Universal Rotary Hole Probe 5.1mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609322	SEU-5.4-35	Universal Rotary Hole Probe 5.4mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8602079	SEU-5.6-35
U8609325	SEU-5.9-35	Universal Rotary Hole Probe 5.9mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8602080	SEU-6.0-35
U8609326	SEU-6.2-35	Universal Rotary Hole Probe 6.2mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609327	SEU-6.3-35	Universal Rotary Hole Probe 6.3mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8602081	SEU-6.4-35	Universal Rotary Hole Probe 6.4mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609328	SEU-6.6-35	Universal Rotary Hole Probe 6.6mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609329	SEU-6.7-35	Universal Rotary Hole Probe 6.7mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609330	SEU-7.0-35	Universal Rotary Hole Probe 7.0mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609331	SEU-7.1-35	Universal Rotary Hole Probe 7.1mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609333	SEU-7.8-35	Universal Rotary Hole Probe 7.8mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609334	SEU-7.9-35	Universal Rotary Hole Probe 7.9mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
Q6090023	SEU-7.9-51	Universal Rotary Hole Probe 7.9mm diameter, Stainless Steel fixed diameter with 50mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609335	SEU-8.2-35	Universal Rotary Hole Probe 8.2mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609336	SEU-8.3-35	Universal Rotary Hole Probe 8.3mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609337	SEU-8.6-35
U8602082	SEU-9.0-35	Universal Rotary Hole Probe 9.0mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609340	SEU-9.4-35	Universal Rotary Hole Probe 9.4mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609341	SEU-9.5-35	Universal Rotary Hole Probe 9.5mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609342	SEU-9.8-35	Universal Rotary Hole Probe 9.8mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8609343	SEU-9.9-35	Universal Rotary Hole Probe 9.9mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration.
U8250168	SNG375-2.5L-10K-TF	Spring loaded surface spot probe, 10 khz, Triax Fischer/LEMO connector - Bridge coil configuration.
U8634136	SNG375-3L-25K-TF	Spring loaded surface/spot probe, 25KHz, triax Fischer/Lemo connector.
U8629541	SPO-4376L	SPO-4376L Weld Probe, PowerLink Standard Bridge Detachable Weld Probe, 100 kHz - 1 MHz, Straight, 8.3 mm ( 0.330 in.) Tip Diameter, Overall length 82.5 mm (3.25 in.), 7 Pin LEMO connector.
Q6020005	SPO-5376	Special purpose rotary scanner probe for flat bottom hole inspection. 0.250 inch (3.3mm) diameter, reflection differential coil configuration, 4 pin Fischer connector.
U8629963	SPO-6464
U8800538	SPO-6687	SPO-6687 Cable, reflection coil configuration probes with triax Fischer/Lemo connector to N600, N500, N1000 or N2000 instrument (16 pin LEMO), 6 ft
U8626147	SPO-7118
Q6000035	SPO-7188 12.7 mm	SPO-7188 12.7 mm probe only
Q6400015	SPO-7261
Q2500346	SPO-7264	Special purpose wheel probe for Alcoa, GA88351M Rim Flange.
Q2500354	SPO-7265	Special purpose wheel probe for Alcoa, GA88651M, Catear.
U8600481	SUB-10-12	Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.156 in. (3.97 mm) diameter, Self Expanding 1.75 in. (44.4 mm) working length. Operating frequency 200 kHz -3 MHz, Fischer 4 Pin connector, reflection differential coil configuration.
U8600482	SUB-12-14	Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.187 in. (4.76 mm) diameter, Self Expanding 1.75 in. (44.4 mm) working length. Operating frequency 200 kHz - 3 MHz, Fischer 4 Pin connector, reflection differential coil configuration.
U8600483	SUB-14-16	Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.218 in. (5.56 mm) diameter, Self Expanding 2 in. (50.8 mm) working length. Operating frequency 200 kHz - 3 MHz, Fischer 4 Pin connector, reflection differential coil configuration.
U8600484	SUB-16-18	Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.250 in. (6.35 mm) diameter, Self Expanding 2 in. (50.8 mm) working length. Operating frequency 200 kHz - 3 MHz, Fischer 4 Pin connector, reflection differential coil configuration.
U8600485	SUB-18-20	Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.281 in. (7.14 mm) diameter, Self Expanding 2 in. (50.8 mm) working length. Operating frequency 200 kHz - 3 MHz, Fischer 4 Pin connector, reflection differential coil configuration.
U8600486	SUB-20-24	Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.312 in. (7.94 mm) diameter, Self Expanding 2 in. (50.8 mm) working length. Operating frequency 200 kHz -3 MHz, Fischer 4 Pin connector, reflection differential coil configuration.
U8600487	SUB-24-28	Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.375 in. (9.52 mm) diameter, Self Expanding 2 in. (50.8 mm) working length. Operating frequency 200 kHz -3 MHz, Fischer 4 Pin connector, reflection differential coil configuration.
U8600488	SUB-28-32	Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.437 in. (11.11 mm) diameter, Self Expanding 2 in. (50.8 mm) working length. Operating frequency 200 kHz -3 MHz, Fischer 4 Pin connector, reflection differential coil configuration.
U8600490	SUB-36-40	Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.562 in. (14.29 mm) diameter, Self Expanding 2 in. (50.8 mm) working length. Operating frequency 200 kHz -3 MHz, Fischer 4 Pin connector, reflection differential coil configuration.
U8600491	SUB-40-44	Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.625 in. (15.88 mm) diameter, Self Expanding 2 in. (50.8 mm) working length. Operating frequency 200 kHz - 3 MHz, Fischer 4 Pin connector, reflection differential coil configuration.
U8600494	SUB-8-10	Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.125 in. (3.18 mm) diameter, Self Expanding 1.75 in. (44.4 mm) working length. Operating frequency 200 kHz - 3 MHz, Fischer 4 Pin connector, reflection differential coil configuration.
U8670107	SUBK-8-44
Q2800630	TEA-082-600-N20
Q2800349	TEA-100-015-N15	Bobbin Probe, Attached, 10 mm (0.394 in.), 3-30 kHz, 15 m (49.2 ft.) cable
U8281753	TEA-102-600-N20	Bobbin Probe, Attached, 10.2 mm (0.402 in.), 120-1200 kHz, 20 m (65.6 ft.) cable
Q2800317	TEA-112-050-N30	Bobbin Probe, Attached, 11.2 mm (0.441 in.), 10-100 kHz, 30 m (98.4 ft.) cable
U8280768	TEA-120-250-N15	Bobbin Probe, Attached, 12 mm (0.472 in.), 50-500 kHz, 15 m (49.2 ft.) cable
U8281344	TEA-124-050-N20	Bobbin Probe, Attached, 12.4 mm (0.488 in.), 10-100 kHz, 20 m (65.6 ft.) cable
Q2800647	TEA-130-015-N15
U8280933	TEA-136-050-N20	Bobbin Probe, Attached, 13.6 mm (0.535 in.), 10-100 kHz, 20 m (65.6 ft.) cable
U8665001	TEA-140-050-N15	Bobbin Probe, Attached, 14 mm (0.551 in.), 10-100 kHz, 15 m (49.2 ft.) cable
U8280447	TEA-140-050-N20	Bobbin Probe, Attached, 14 mm (0.551 in.), 10-100 kHz, 20 m (65.6 ft.) cable
U8281740	TEA-144-050-N15	Bobbin Probe, Attached, 14.4 mm (0.567 in.), 10-100 kHz, 15 m (49.2 ft.) cable
U8282109	TEA-148-015-N05	Bobbin Probe, Attached, 14.8 mm (0.583 in.), 3-30 kHz, 5m cable
Q2800318	TEA-148-050-N30	Bobbin Probe, Attached, 14.8 mm (0.583 in.), 10-100 kHz, 30 m (98.4 ft.) cable
U8280625	TEA-158-015-N20	Bobbin Probe, Attached, 15.8 mm (0.622 in.), 3-30 kHz, 20 m (65.6 ft.) cable
U8281176	TEA-158-100-N20	Bobbin Probe, Attached, 15.8 mm (0.622 in.), 20-200 kHz, 20 m (65.6 ft.) cable
U8280820	TEA-160-015-N15	Bobbin Probe, Attached, 16 mm (0.63 in.), 3-30 kHz, 15 m (49.2 ft.) cable
U8282065	TEA-164-250-N20	Bobbin Probe, Attached, 16.4 mm (0.646 in.), 50-500 kHz, 20 m (65.6 ft.) cable
U8281086	TEA-170-050-N30	Bobbin Probe, Attached, 17 mm (0.669 in.), 10-100 kHz, 30 m (98.4 ft.) cable
U8281064	TEA-170-250-N20	Bobbin Probe, Attached, 17 mm (0.669 in.), 50-500 kHz, 20 m (65.6 ft.) cable
Q2800596	TEA-176-300-N15
Q2800082	TEA-182-015-N20	Bobbin Probe, Attached, 18.2 mm (0.717 in.), 3-30 kHz, 20 m (65.6 ft.) cable
U8281752	TEA-184-050-N20	Bobbin Probe, Attached, 18.4 mm (0.724 in.), 10-100 kHz, 20 m (65.6 ft.) cable
U8280651	TEA-188-030-N15	Bobbin Probe, Attached, 18.8 mm (0.74 in.), 6-60 kHz, 15 m (49.2 ft.) cable
U8280452	TEA-188-050-N20	Bobbin Probe, Attached, 18.8 mm (0.74 in.), 10-100 kHz, 20 m (65.6 ft.) cable
U8280223	TEA-190-050-N15	Bobbin Probe, Attached, 19 mm (0.748 in.), 10-100 kHz, 15 m (49.2 ft.) cable
U8281166	TEA-194-050-N20	Bobbin Probe, Attached, 19.4 mm (0.764 in.), 10-100 kHz, 20 m (65.6 ft.) cable
Q2800308	TEA-198-015-N30	Bobbin Probe, Attached, 19.8 mm (0.78 in.), 3-30 kHz, 30 m (98.4 ft.) cable
Q2800321	TEA-224-600-N30	Bobbin Probe, Attached, 22.4 mm (0.882 in.), 120-1200 kHz, 30 m (98.4 ft.) cable
U8280627	TEA-228-600-N20	Bobbin Probe, Attached, 22.8 mm (0.898 in.), 120-1200 kHz, 20 m (65.6 ft.) cable
U8281091	TEA-230-050-N30	Bobbin Probe, Attached, 23 mm (0.906 in.), 10-100 kHz, 30 m (98.4 ft.) cable
U8282059	TEA-236-015-N20	Bobbin Probe, Attached, 23.6 mm (0.929 in.), 3-30 kHz, 20 m (65.6 ft.) cable
Q2800319	TEA-236-015-N30	Bobbin Probe, Attached, 23.6 mm (0.929 in.), 3-30 kHz, 30 m (98.4 ft.) cable
U8280850	TEA-304-050-N30	Bobbin Probe, Attached, 30.4 mm (1.197 in.), 10-100 kHz, 30 m (98.4 ft.) cable
U8281555	TEA-314-050-N20	Bobbin Probe, Attached, 31.4 mm (1.236 in.), 10-100 kHz, 20 m (65.6 ft.) cable
U8281880	TEA-328-015-N20	Bobbin Probe, Attached, 40 mm (1.575 in.), 3-30 kHz, 20 m (65.6 ft.) cable
Q2800548	TEB-140-010	Bobbin Probe, Detachable, 14 mm (0.551 in.), 2-20 kHz
U8280566	TEB-140-050	Bobbin Probe, Detachable, 14 mm (0.551 in.), 10-100 kHz
Q2800412	TEB-166-050	Bobbin Probe, Detachable, 16.6 mm (0.654 in.), 10-100 kHz
Q2800413	TEB-166-250	Bobbin Probe, Detachable, 16.6 mm (0.654 in.), 50-500 kHz
U8281703	TEB-176-050	Bobbin Probe, Detachable, 17.6 mm (0.693 in.), 10-100 kHz
U8281102	TEB-188-030	Bobbin Probe, Detachable, 18.8 mm (0.74 in.), 6-60 kHz
U8281934	TED-162-015	Air Conditioner Probe, Detachable, 16.2 mm (0.638 in.), 3-30 kHz
Q2800111	TEE-102-600-N20	Titanium Probe, Attached, 10.2 mm (0.402 in.), 120-1200 kHz, 20 m (65.6 ft.) cable
Q2800640	TEG-154-050-N25
U8282061	TEK-180-250-N20	High Resolution Probe, Attached, 18 mm (0.709 in.), 50-500 kHz, 20 m (65.6 ft.) cable
Q2800667	TEK-326-250-N20
U8800531	TEZ-ACS-N15	Detachable cable for bobbin AC probes, 15 m (49.2 ft.)
U8800031	TEZ-BBK-N15	Kink-resistant detachable cable for bobbin ECT probes, 15 m (49.2 ft.)
U8800498	TEZ-BBK-N20	Kink-resistant detachable cable for bobbin ECT probes, 20 m (65.6 ft.)
U8779159	TFTAPE-0.50	Teflon Tape 1/2 in. Width
U8779160	TFTAPE-0.75	Teflon Tape  3/4 in. Width
U8779701	TFTAPE-1.25	Teflon Tape 1.25 inch (31.7mm) width X 18 yards (16.4M) long.
U8779077	TFTAPE-2.00
Q2800322	TRX-220-300-N30	RFT Dual Exciter Probe, 22 mm (0.866 in.), 300 Hz, 30 m (98.4 ft.) cable
U8281505	TXE-R8-138-MF-N20	Eddy Current Array Tube Probe for circ cracks detection in Stainless Steel, 8 coils array, Attached, 13.8 mm (0.543 in.), Medium Frequency range, 20 m (65.6 ft.) cable
Q2800547	TXE-R8-198-MF-N20	Eddy Current Array Tube Probe for circ cracks detection in Stainless Steel, 8 coils array, Attached, 19.8 mm (0.78 in.), Medium Frequency range, 20 m (65.6 ft.) cable
U8610876	UMP902-60-200K-1M	Absolute unshielded metal shaft microdot detachable pencil probe. Operates on a 200K-1MHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.20" (5.08mm) drop with a 0.125" (3.18mm) (3.18mm) diameter tip. Total length of 6" (152mm).
U8610608	UMTF-40	Straight metal shaft surface probe, 4 inch (10.1cm) overall length. Operating frequency 50kHz -500kHz,  triax Fischer/Lemo connector, bridge unshielded coil configuration.
U8614274	UMTF-40-1-6M	Straight metal shaft surface probe, 4 inch (10.1cm) overall length. Operating frequency 1MHz -6MHz,  triax Fischer/Lemo connector, bridge unshielded coil configuration.
U8250323	UMTF453-45-200K-1M	Bridge Absolute un-shielded metal shaft Triax Lemo/Fischer detachable pencil probe. Operates on a 200kHz-1MHz frequency range. Forty Five degree Shaft, 0.30in. (7.6 mm) drop with a 0.125" diameter tip. 4.5 inch (11.4cm) overall length
U8623361	UMTF901-50	Unshielded right angle metal shaft surface probe, 5 inch overall length with 0.1 inch drop at tip. Operating frequency 50KHz -500KHz, microdot connector, absolute coil configuration.
Q2500738	UMTF9025-60FX	Right angle flexible metal shaft surface probe, 6 inch (15.2cm) overall length with 0.25 inch (6.3mm) drop. Operating frequency 50kHz -500kHz,  triax Fischer/Lemo connector, unshielded bridge coil configuration.
U8623143	UMTF902-60-200K-1M	500KHz center frequency Surface Probe
U8620232	UP-30	Surface Probe
U8620237	UP-80FX	Surface Probe
U8690018	WLD-5-63	Weld Surface Probe, 100 kHz to 600 kHz, Straight Probe, 5.0 mm (0.196 in.) tip diamter, 6.1 mm (2.4 in.) length, 4-pin LEMO Connector
U8690046	WLD-5-63-TF	WLD-5-63-TF: Weld Probe, Standard Bridge Detachable Weld Probe, 100Khz-600 kHz, Straight, 5.0 mm ( 0.196 in.) Tip Diameter, Overall length 61.0 mm (2.4 in.), Triax Fischer/LEMO connector 61 mm
Q2500436	WLD-5-63-TF-NFE
U8690019	WLD-8-55	Weld Surface Probe, 100 kHz to 600 kHz, Straight Probe, 8.0 mm (0.314 in.) tip diamter, 5.5 mm (2.16 in.) length,  4-pin LEMO Connector
U8690022	WLD90I-5-50
U8629542	WLD90I-5-50-TF	WLD90I-5-50-TF: Weld Probe, Standard Bridge Detachable Weld Probe, 100 kHz - 600 kHz, Right Angle, 5.0 mm (0.196 in.) Tip Diameter, Overall length 50.0 mm (1.96 in.), Triax Fischer/LEMO connector.