| KTY torque motors Our new framed KTY-Q and KTY-R synchronous torque motors set a new benchmark with regard to maximum drive system torque and stiffness, and are also extremely compact. The KTY model series is a useful alternative to geared motors in any application you can think of, and the motors in this model series have sensibly graduated torques ranging from 12 Nm to 280 Nm. This means that direct drive technology is also available in this torque class for the first time, which is convenient for the user. Three different flange sizes are all available in 3-4 lengths in order to meet requirements in the best possible way.
- Extremely good dynamics due to low moment of inertia values
- High overloading capability
- High positioning accuracy due to high-resolution encoder systems and avoidance of components that are susceptible to play and friction
- Motors with hollow shaft, full shaft, loose flange, blind hole shaft and shrink disk available
- Permissible radial and axial force can be increased if required
- Optionally available with spring pressure safety brake
Technical equipment
- Top quality rare-earth magnets
- Optimized lamination
- Oscillation strength R, oscillation strength S in accordance with DIN VDE 0530-14 （on request）
- Flange dimensions standardized in accordance with DIN 42 677 （special flanges optionally available）
- Flange accuracy in accordance with DIN 42 955
- Full shaft with/without feather key, hollow shaft with shaft end at A and/or B side, blind hole shaft, shaft with shrink disk or loose flange （on request）
- Protection class IP 54, square, without housing
- Protection class IP 65 round, housing made of light metal alloy （R series）
Insulation class F |  | G²Drive Geared Motors The new G²Drive range of geared motors opens up new applicational possibilities. And that three times at once:
- Up to 25% shorter installation length due to the optimal connection of motor and gearbox
- Up to 20% less weight due to shorter installation length
- Up to 20% less costs - your advantage over the competition
In addition, two different gearbox versions widen your constructive flexibility. With an angled and a planetary gearbox, nothing can get in the way of your ideas any longer.
- Integrated geared servo motors based on KSY D or KSY Q series
- angular gear motor with full shaft or hollow shaft on both sides and shrink disc available on request
- compact design
- various encoder systems are available on request
- security spring brake on request
- mainentance free |
| Synchronous Servo Motors KSY D Brushless three-phase synchronous servo motors with permanent magnets.
- Static torque 0.1 to 115 Nm.
- Particularly high power density
- Large rotational speed control range
- High dynamics and precision
- Maintenance-free
- Optionally with brake
Customer-specific solutions: high rotational speeds, special flanges, special shafts etc. | | Synchronous Servo Motors KSY Q With the new cost optimised synchronous servo motors KSY Q, Georgii Kobold extends the current motor range. This laminated motor is available from size 1 to 5. It completes the D-series when it comes to medium speeds and it achieves higher torques in a more compact design. The available torques range from 0,55 Nm up to 45 Nm at a nominal speed of 3000 1/min.
- Brushless triphase synchronous servo motors with permanent magnets
- standstill torque 0,55 up to 45 Nm
- various encoder systems are available on request
- robust body
- especially high performance density in a compact design
- high precision
- maintenance free
- security spring brake on request
- protection class IP 54
- insulation class F
Customer's specific solutions are available on request: special flanges, special shafts etc. |
| Digital AC Servo Drive Systems KTx/KMx Digital servo controller for three-phase synchronous servo motors with permanent magnets.
- Compact devices for mounting in control cabinets
- Integrated safety technology
- Comprehensive technical functions
- High dynamics and quality of control
- Choice of field bus interfaces
- Profibus DP
- CANopen
- EtherCAT
- Analog and digital inputs and outputs
- Integrated mains filter and ballast circuit
- Direct connection to 230 V or 3 x 400/480 V | | Distributed Servo Drives KSD Three-phase synchronous servo motors with integrated servo controllers
- Compact drives for mounting directly on the machine
- Integrated technical functions
- Analog and digital inputs and outputs
- Choice of field bus interfaces
- Profibus DP
- CANopen
- Integrated ballast circuit
- Version for connection to 24-60 V DC or 230 V AC |
| Stainless Steel Synchronous and Asynchronous Servo Motors KSY-E/KSA-E Stainless steel three-phase synchronous servo motors and frequency-controlled asynchronous motors.
- Suitable for food industries
- High power density
- Large rotational speed control range
- High dynamics and precision
- Low noise and maintenance-free
- Complete with servo controllers or vector-controlled frequency and servo converters | | Asynchronous Servo Motors KSA Frequency-controlled asynchronous motors
- Full torque over a wide range of rotational speeds
- High rotational speeds
- Low noise and maintenance-free
- Modular construction
Complete with vector-controlled frequency and servo converters |
| Three-phase asynchronous motor KOD Three-phase short circuit asynchronous motor, frame-cooled.
- high efficiency reserve
- high switching frequency
- Solid construction and high reliability
- quiet and maintenance-free
- different mounting types to choose
- suitable for operation of a frequency converter | | Asynchronous Torque Motors KOD-DM KSA-DM GEORGII KOBOLD - asynchronous torque motors are special electrical and mechanical versions of three-phase asynchronous motors. They are designed to be short circuit-proof, i.e. they make it possible to leave stationary machinery switched on with the full mains voltage and maintain a torque, or provide torques for control purposes at certain speeds.
- Torque control capability
- rapid response times
- unlimited switching frequency
- hum-free operation
- torque independent on twisting angle
- position-independent
- low energy consumption
- based on KOD or KSA series
- optional with brake and fan
Customer's specific solutions are available on request: special flanges, special shafts etc. |
