目錄:深圳市漢斯福特科技有限公司>>稱重傳感器>>壓力傳感器>> 1022V力傳感器
| 參考價 | 面議 |
| 參考價 | 面議 |
更新時間：2024-06-26 15:52:49瀏覽次數：78評價
聯系我們時請說明是化工儀器網上看到的信息，謝謝!
漢斯福特代理的美國Dytran 1022V微型IEPE力傳感器，是Dytran公司最小最輕的力傳感器，精準測量動態力。量程50 Lb，靈敏度100mV/Lb，頻率50kHz。作為一個IEPE傳感器，內置電路，不需要外置放大器和轉換器。
The Dytran 1022V is a miniature lightweight IEPE force sensor designed to offer low mass dynamic measurement capabilities within Dytran's smallest and most lightweight package. Measuring just 0.49 inches (12.4 millimeters) tall and weighing just 4.5 grams (less cable), the Dytran model 1022V offers precision force measurement capabilities of up to 50 lbf, with a 100 mV/lbf sensitivity and an unloaded 50 kHz natural frequency. As an IEPE sensor, the model 1022V features built-in electronics, eliminating the need for an external charge amplifier and converter.
特性
1. 100 mV/lbf sensitivity
2. 50 lbf compression range
3. 50 lbf tension range
4. 100 lbf maximum compression
5. 75 lbf maximum tension
6. 5-foot integral cable
7. 10-32 tapped holes top and bottom
8. 4.5 grams
9. Titanium
10. Miniature
11. IEPE
應用
1. Modal and structural analysis
2. Process control
3. General purpose dynamic force measurements where mass loading is a concern or where vertical space requirements may be limited
Design of the model 1022V features a quartz sensing element, operating in compression mode and packaged in a lightweight titanium housing with an integral 5-foot coaxial cable terminating to a 10-32 coaxial connector. A series of 10-32 tapped holes, located at both the top and bottom of the sensor housing, are designed to facilitate mounting of the sensor in threaded holes on the driving rods and test specimen.
Weight (less cable) 0.16 oz 4.50 grams Supplied Accessories:
Size Height X Diameter 0.49 x 0.40 Inches 12.44 x 10.16 mm
Material Ti 6AI-4V Ti 6AI-4V 3) 6742 Removal tool
Housing Material Ti 6AI-4V Ti 6AI-4V N
Sensing Element Material Quartz Quartz
Mode Compression Compression
Sensitivity, ± 10 % 100 mV/LbF 22.5 mV/N
Range, Full Scale ± 50 LbF ± 222 N
Stiffness 26 Lb/μin 2039 kN/μm
Linearity [3] ± 1 % Full Scale ± 1 % Full Scale
Max Shock, Unloaded 5000 g's 5000 g's
Max Vibration, Unloaded ± 2500 g's ± 2500 g's
Mounted Resonant Frequency, Unloaded 50 kHz 50 kHz
Noise Resolution 0.0004 LbF rms 0.0018 N rms
Strain Sensitivity @250/µσ 0.006 LbF/µε 0.027 N/µε
Supply Current Range [4] 2 to 20 mA 2 to 20 mA
Compliance Voltage Range 18 to 30 Volts 18 to 30 Volts
Output Impedence,Typ 150 ? 150 ?
Bias Voltage +7.5 to +9.5 VDC +7.5 to +9.5 VDC
Discharge Time Constant >100 Sec >100 Sec
F.S.Output Voltage,Nom 5 Volts, peak 5 Volts, peak
Output Signal Polarity Compression Positive Positive
Tension Negative Negative
Operating Temperature -100 to +250 °F -73 to +121 °C
Environmental Seal Welded/Epoxy Welded/Epoxy
配件
Supplied Accessories: (2) model 6200 mounting studs (10-32 to 10-32), (1) model 6742 thermal boot
Recommended Accessories: model 4110C current source power unit
Compatible Cables: 6011A
訂貨型號
1022V
相關型號
1050C
1051V6
1053V
1061V
1210V1
(空格分隔,最多3個,單個標簽最多10個字符)
會員.png)
2
化工儀器網