產品簡介
采用進口優質聚碳酸酯注塑成型,重量輕、強度大
采用進口優質硅橡膠密封圈,免用密封油脂
真空表,可直觀顯示真空度
采用*進口精密針閥,進氣量可以微調
使用工作溫度 -25攝氏度~-120攝氏度
詳細介紹
尼克儀器有限公司真空攪拌器可在抽真空下攪拌生化試劑、藥品、香料,顏料等。擁有氣閥也可以加注惰性氣體進行交辦工作,可防止產品氧化產生氣泡。真空干燥、真空浸漬、檢漏等操作。真空狀態下加注液體物質、惰性氣體,同時可根據需求進行安裝加熱組件加熱。
特點:
真空維持時間長,30天減少5%
采用進口優質聚碳酸酯注塑成型,重量輕、強度大
采用進口優質硅橡膠密封圈,免用密封油脂
真空表,可直觀顯示真空度
采用進口精密針閥,進氣量可以微調
使用工作溫度 -25攝氏度~-120攝氏度
規格:
型號:NKV40-J
材質:主體,PC(聚碳酸酯)、硅膠密封圈
容許真空度:約133Pa(1mmHg)
針閥管徑:8mm
容積:約47L
外部尺寸:500mm*420mm*420mm
內部尺寸:400mm*350mm*350mm
重 量:15kg
Applied in fields of biochemisery, chemical industry, pharmacy , medicine and health,
Agriculture , scientific research and development , environmental protection ,etc.
- Constant temperature heating function:
Suitable for powder drying, roasting, and glassware sterilization and disinfection.
It is designed specially for instant drying of material with complicated components, which is thermo-sensitive,and easily decomposed or oxidized.
- Agitating function:
Agitating under vacuum to efficiently avoid bubble generation. Be able to inject inert gases to create a safe and protective environment.
- Specifications:
Long time vacuum maintenance:vacuum loss is less than 5% in 30 days
High qunlity imported polycarbonate for injection molding:lightweight and great intension
High quality imported silastic sealed ring:sealed grease free
Real-time vacuum meter:can visually observe the vacuum level
Dedicated imported precision needle valve:can fine tune the air flow
Working temperature:-25℃~120℃
Efficient,and safe vacuum drying process,especially for volatile liquids
Model | NKV400-JH(with mixer) |
Material | Polycarbonate(body),silicon rubber(seal ring) |
Maximum vacuum level | -133Pa(1mmHg) |
Needle valve diameter | 8mm |
Volume | -47L |
Outside dimensions | 520mm×450mm×400mm |
Inside dimensions | 400mm×350mm×350mm |
Partition dimensions | 340mm×340mm |
Weight | 22Kg |
Power supply | 220VAC,50/60HZ |
Agitating capacity | 1L-20L |
Constant heating temperature range | Ambient temperature to 150℃ |