您好, 歡迎來到化工儀器網! 登錄| 免費注冊| 產品展廳| 收藏商鋪|
當前位置:北京恒遠安諾科技有限公司>>MRO化工品>> KI Kirchgaesser微波接收發射器、微波放大器、微粒測
參 考 價 | 面議 |
產品型號
品 牌
廠商性質經銷商
所 在 地北京市
更新時間:2022-12-29 07:23:19瀏覽次數:796次
聯系我時,請告知來自 化工儀器網KI Kirchgaesser微波接收發射器、微波放大器、微粒測
簡單介紹 KI Kirchgaesser流量傳感器,壓力傳感器,溫度傳感器,液位傳感器以及微波探測器及光柵等
Kirchgaesser的詳細介紹
德國
Kirchgaesser公司一直致力于創新研發、制造高質量的用于采礦及其他工業領域的防爆測量裝置,產品具有*的精度和可靠性,使用壽命長,免維護,尤其在苛刻的工況中占據著歐洲主要的*。
具體產品有流量傳感器,壓力傳感器,溫度傳感器,液位傳感器以及微波探測器及光柵等。
優勢提供德國Kirchgaesser傳感器、微波探測器、微波發射器、微波接收器、微波放大器、微粒測量?jī)x、微波接收發射器、礦用流量計、限位開關、信號放大器、流量計、溫度計、液位計、物位計、測量系統、檢測器
監控儀、、、。詳情請我公司。
l 取得 ATEX 1/2 D 認證
微波接收發射器(微波探測器): FQR50 / FDR50 、R 11/2- OR 11/2"
微波放大器: FTR 325、FQR 50 / FDR 50
微粒測量?jī)x:PARTIMEX、(PARTIMEX-SRM)、(PARTIMEX-SRM)
遠程運算器 (PARTIMEX-A*) MARKING: I M1 EEX IA I ( 01 ATEX E 167)
礦用流量計:MIDEX
Kirchgaesser代表型號有:MIDEX、MIKRO-/MINIMIDEX-A MIT
MXR、MID-EX-E、MIKRO-/MINIMIDEX-E、MIKRO-/MINIMIDEX-E2、MULTIMIDEX、PEMEX-E、PEMEX-LC、TEMEX、RASOMEX、UMINEX、BRUNNENSYSTEM
PEMEX-BS、ULTRAMEX、FLUWEX-A MIT MXR、PARTIMEX、SOLWEX20、MESS-SYSTEM
SYMEX、AQUACONEX、FDR 50 / FQR 50、FDR 50 / FQR 50
(EDELSTAHLAUSFüHRUNG)、SCHALTVERST?RKER FTR 325、KüHLWASSER-STEUERGER?T
AQUACONEX、MID-EX-E、、、
Magnetic-inductive flow meter
MIDEX
Digital local display
Max. 8 signal outputs e.g. frequency 5 - 15 Hz
Refrigeration capacity measurement (up to 20,000 kW)
Nominal width: DN50 to DN300
Nominal pressure: PN10 to PN500
Measuring range: max. 2000 m³/h and 1000 l/min respectively
MIKRO-/MINIMIDEX-A with MXR
Evaluation unit with remote transducer
Max. 2 signal outputs e.g. frequency 5 - 15 Hz
Nominal width: DN10 to DN31
Nominal pressure: PN100 to PN500
Measuring range: max. 800 l/min
MID-EX-E
Compact and robust flow meter with optional integrated pressure
measurement
Replaces older flow meters MIKRO-/MINIMIDEX-E/-E2
Signal outputs: frequency, limit, current or voltage
Nominal width: DN10, DN19 and DN25, optional with plug couplers DN10 to
DN31
Nominal pressure: PN100 to PN500
Measuring range: max. 400 l/min and 400 bar respectively
MID-EX-C
Compact and robust flow transducer for small flow rate to connect with a
Kirchgaesser evaluation and/or display unit or signal converter
respectively
Nominal width: DN10, DN19 and DN25, optional with plug couplers DN10 to
DN31
Nominal pressure: PN100 to PN500
Measuring range: max. 400 l/min and 400 bar respectively
MID-EX-GC
Compact and robust flow transducer for high flow rate to connect with a
Kirchgaesser evaluation and/or display unit or signal converter
respectively
Nominal width: DN50 to DN300, optional with high pressure couplings
Nominal pressure: PN10 to PN160
Measuring range: max. 1000 l/min and 2000 m³/h respectively
MULTIMIDEX
Compact four channel flow meter
Signal outputs: frequency, serial, CAN
Nominal width: DN12
Nominal pressure: PN100
Measuring range: 0 - 50 l/min
Pressure meter
PEMEX-E
Digital local display
Max. 2 output signals (frequency 5 - 15 Hz, limit)
Measuring range: max. 1000 bar
Process connection, sensor:
- Pipe thread G1¼, flush-mounted ceramic sensor or
- Pipe thread G½, internal ceramic sensor or
- Pipe thread G½, flush-mounted thinfilm sensor or
- Pipe thread G½, internal thinfilm sensor or
- Socket nipple DN10 (acc. to DIN 20043), thinfilm sensor
PEMEX-LC
Compact pressure meter
Output signal:
- Frequency 5 - 15 Hz or
- Voltage 1 - 5 V or 1 - 10 V
Measuring ranges:
Selectable in the range of 0 - 40 mbar to 0 - 1000 bar acc. to the table
of versions (other measuring ranges are available on request)
Process connection, sensor:
- Pipe thread G1¼, flush-mounted ceramic sensor or
- Pipe thread G½, internal ceramic sensor or
- Pipe thread G½, flush-mounted thinfilm sensor or
- Pipe thread G½, internal thinfilm sensor or
- Socket nipple DN10 (acc. to DIN 20043), thinfilm sensor
PEM-EX-C
Compact pressure transducer for connection to a Kirchgaesser evaluation
and/or display unit or signal converter respectively
Measuring ranges:
Selectable in the range of 0 - 40 mbar to 0 - 1000 bar acc. to the table
of versions (other measuring ranges are available on request)
Process connection, sensor:
- Pipe thread G1¼, flush-mounted ceramic sensor or
- Pipe thread G½, internal ceramic sensor or
- Pipe thread G½, flush-mounted thinfilm sensor or
- Pipe thread G½, internal thinfilm sensor or
- Pipe thread G¼, internal thinfilm sensor or
- Socket nipple DN10 (acc. to DIN 20043), thinfilm sensor
Temperature meter
TEMEX
Digital local display
Max. 2 output signals (frequency 5 - 15 Hz, limit)
Measuring range:
-20°C to +70°C (quartz sensor) or
-20°C to +150°C (semiconductor sensor)
Various programmable functions like:
- Limit detection
- Simulation of measuring value
- Error diagnosis
TEM-EX-C
Compact temperature transducer for connection to a Kirchgaesser
evaluation and/or display unit or signal converter respectively
Measuring range:
Selectable in the range of -20°C to +150°C acc. to the table of versions
(other measuring ranges are available on request)
Process connection:
- Thread G½
- Selectable length of sensor
Level meter
RASOMEX
Measuring principle: Radar
Output signal:
- Frequency 5 - 15 Hz or
- Current 4 - 20 mA or
- Voltage 0.4 - 2.0 V or
- Voltage 1 - 5 V or
- Voltage 1 - 10 V and
- Alarm output (potential-free optocoupler)
Measuring range: max. 70 m
Microprocessor-controlled evaluation unit RASOMEX-S with remote display
and operation unit RASOMEX-A
UMINEX
Measuring principle: Ultrasonic
Output signal:
- Frequency 5 - 15 Hz
- Max. 3 programmable relay outputs
Evaluation unit with LC-display
Measuring range: max. 3 m for solids and 8 m for liquids
PEMEX-BS
evaluation unit PEMEX-BSA with remote transducer PEMEX-BSS
Level measuring in pressureless (deep) springs or in water towers
Measuring range: 0 - 10 m to 0 - 250 m
Max. cable length of transducer: 2000 m
Microprocessor-controlled evaluation unit with following features:
- Memory for up to 35 measuring values
- Power supply with (rechargeable) batteries (4x type AA)
- Internal LC-display
- Serial interface to transfer measuring values to PC
- Software to transfer measuring values to Microsoft Excel®
ULTRAMEX
This measuring device was replaced by the new level meter RASOMEX.
Magnetic-inductive flow monitor
FLUWEX-A with MXR
Digital local display
Max. 2 signal outputs (e.g. frequency 5 - 15 Hz)
Measuring range: 0 - 5 m/s
Extensive functionality like
- Limit generation
- Simulation of the measuring value
- Error diagnosis
Particle meter
PARTIMEX
Digital local display
Output signal:
- Frequency 5 - 15 Hz,
- Current 4 - 20 mA or
- Voltage 0.4 - 2.0 V and
- Max. three programmable optocoupler outputs
Measuring range (level of intensity):
10 to 100 (detection of particles < 5 µm)
Wide functionality like
- Limit detection
- Simulation of measuring values
- Remote diagnosis
Microwave barrier
SOLWEX20
Features:
- LED field strength display
- Selectable pull-in/drop-out delay
- Current monitoring of emitter/receiver
Output signals:
- 3 optocoupler outputs (switching and alarm)
- Max. 2 optional relay outputs (change-over contact)
Detection range: max. 20 m
Control systems
AQUACONEX
Cooling water control for up to two motor circuits
Signal outputs:
Frequency 5 - 15 Hz, pulse or limit (programmable) and one relay contact
(change-over switch)
Measuring range: 0 - 30 l/min (per circuit)
Different maintenance and cleaning facilities
Microwave barrier
FDR50/FQR50
Contact-free detection of all types of bulk solids
Suitable as level limit switch and for counting bulk solids
Detection range: max. 20 m
Process connection:
- Thread R1½ (EN 10226) or
- Thread 1½ NPT (ANSI/ASME B1.20.1)
Conforms to:
- ATEX II 1/2D
- ATEX II 1/2GD
- IECEx
Switching amplifier FTR325
1-channel switching amplifier for the microwave barrier FDR50/FQR50
High level of operational safety through line monitoring up to the
sensor
LED display of operating and switching state
Selectable pick up and/or drop out delay of the switching output
Compact housing for easy inline mounting on standard rack rails
Level meter
FMM50
Electromechanical level measuring system for heavy-weight grained bulk
solids and for liquids
Traction power: max. 500 N
Output signal:
- Current 0/4 - 20 mA and
- Max. 6 programmable relays
Measuring range: max. 70 m
Power supply:
180 - 253 VAC, 50/60 Hz or 90 - 127 VAC, 50/60 Hz
Optional design with certification for applications in areas subject to
dust explosion hazard zones 20, 21 and 22, category 1/2D
FMM20
Electromechanical level measuring system for lightweight grained bulk
solids and for liquids
Traction power: max. 150 N
Output signal:
- Current 0/4 - 20 mA and
- Max. 4 programmable relays
Measuring range: max. 32 m
Power supply: 90 - 253 VAC, 50/60 Hz or 20 - 28 VDC
Optional design with certification for applications in areas subject to
dust explosion hazard zones 20, 21 and 22, category 1/2D
COMBA-EX
Evaluation and display unit for up to 4 transducers
Possible transducers:
- PEM-EX-C (pressure) and/or
- TEM-EX-C (temperature) and/or
- MID-EX-C (small flow) and/or
- MID-EX-GC (high flow)
Automatical detection of the connected transducers (type and measuring
range)
Output signal:
Frequency 5 - 15 Hz
No parameterizing or programming required
Maintenance-free
MID-EX-C
Compact small flow transducer to connect with a Kirchgaesser evaluation
and/or display unit or signal converter respectively
Measuring range: max. 400 l/min
Nominal width: DN10, DN19 and DN25,
optional with plug couplers DN10 to DN31
Nominal pressure: PN100 to PN500
MID-EX-GC
Compact high flow transducer to connect with a Kirchgaesser evaluation
and/or display unit or signal converter respectively
Measuring range:
max. 1000 l/min and 2000 m³/h respectively
Nominal width:
DN50 to DN300, optional with high pressure couplings
Nominal pressure: PN10 to PN160
PEM-EX-C
Compact pressure transducer to connect with a Kirchgaesser evaluation
and/or display unit or signal converter respectively
Measuring ranges:
Selectable in the range of 0 - 40 mbar to 0 - 1000 bar acc. to the table
of versions (other measuring ranges are available on request)
Various process connections
TEM-EX-C
Compact temperature transducer to connect with a Kirchgaesser evaluation
and/or display unit or signal converter respectively
Measuring ranges:
Selectable in the range of -20°C to +150°C acc. to the table of versions
(other measuring ranges are available on request)
Process connection:
- Thread G½
- Selectable length of sensor
恒遠安諾科技有限公司
錢
:
:
:1095688308
請輸入賬號
請輸入密碼
請輸驗證碼
以上信息由企業自行提供,信息內容的真實性、準確性和合法性由相關企業負責,化工儀器網對此不承擔任何保證責任。
溫馨提示:為規避購買風險,建議您在購買產品前務必確認供應商資質及產品質量。