您好, 歡迎來到化工儀器網
| 產地類別 | 國產 | 價格區間 | 面議 |
|---|---|---|---|
| 儀器種類 | 管式爐 | 應用領域 | 醫療衛生,環保,食品,化工 |
產品簡介
詳細介紹
三溫區滑軌式快速升降溫爐主要特點Main features:
Slide rail type furnace is designed for rapid increase in growth ,graphene growth furnace .also apply to requirement rise faster cooling speed CVD experiment.can design production
滑軌式快速升溫爐是專為生長石墨烯研制的石墨烯生長專用爐，也同樣適用于要求升降溫速度比較快的CVD實驗，可根據用戶需要設計生產(有雙溫區、三溫區、多溫區)，
according to the rquire of user （with double heat zne ,more than three zone thmperature area ）,constant high temperature operation experiment set can be directly push to tthe samples
操作時可將實驗設定的恒定高溫直接推到樣品處，使樣品得到快速升溫
to make samles to get fast heating .also the high temperature tube furnace can be direct pull off a samples . the samples directly expose in to the room temperature enviroment ,get rapidly cooling
同樣也可將高溫的管式爐直接推離樣品處，使樣品直接暴露在室溫環境下，得到快速的降溫。
三溫區滑軌式快速升降溫爐技術參數Technical Parameters
Power 輸入電源 | Power rated: 7KW（208-240V） 額定功率：7KW（208-240V） | ||||
Voltage 電壓 | Voltage rated: AC208-240V 50/60HZ 額定電壓： AC208-240V 50/60HZ | ||||
Working Temperature 工作溫度 | Max. Temperature: 1200℃( 1 hr) 最高溫度：1200℃ (1小時) Continuous working temperature: ≤1100℃ 持續工作溫度：≤1100℃ Max. Heating/colling Rate: ≤20℃/S 升溫速率：≤20℃/秒 | ||||
控溫方式 | PID automatic control and auto-tune function. 模糊PID控制和自整定調節 30 programmable segments for precise thermal processing. 智能化30段可編程控制 Built-in protection for the over-heated and broken thermocouple. 超溫和斷偶報警功能 | ||||
Length of heating zone 加熱區長度 | 300+300+300mm | ||||
Length of constant zone 恒溫區長度 | 150+200+150mm | ||||
Movable Range 可移動范圍 | 1200mm | ||||
Heating Elements 加熱元件 | Resistance wire, Fe-Cr-Al Alloy doped by Mo 電阻絲（摻鉬鐵鉻鋁合金） | ||||
Temperature Accuracy 控溫精度 | +/- 1℃ | ||||
Processing tube 爐管 | size:Φ50/80/100/130*1800mm(optional) 尺寸：Φ50/80/100/130*1800mm(管徑可選) Two tube blocks are included for blocking heat radiation generated from tube center.,must be fully inserted into the furnace chamber before heating(quartz or ceramic optional). 兩個氧化鋁管堵阻擋管中心產生的熱輻射，管堵必須在加熱前塞進爐膛的正確位置(石英或氧化鋁管堵可選)
| ||||
Dimensions 尺寸 | Furnace size :2000*490*760mm(L*W*H without tube & flange) 爐子尺寸：2000*490*760mm(長*寬*高 不含爐管和法蘭) | ||||
Net Weight 凈重 | 190kg | ||||
真空法蘭 | KF25 quick clamp flange 兩端為KF25快速卡箍法蘭
| ||||
Vacuum Pressure 真空壓力 | 1pa can be achieved by mechanical pump 機械泵可達1pa 10^-4 pa can be reached by molecular pump 分子泵可達10^-4pa Please click the picture below to order vacuum parts 點擊下列圖片訂購真空部件
| ||||
Warranty 質保 | One year limited warranty with lifetime support (Such consumable parts as tube, quartz block, and O-rings, etc. are NOT supported by the warranty) 一年質保終身支持（消耗品如爐管，石英管堵，O型圈等不在質保范圍內） | ||||
Warning 注意事項 | Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating. 在使用過程中爐膛表面可能出現細小裂紋。這是正常情況，裂紋可以用氧化鋁涂層修復。 | ||||
Compliance 認證 | CE Certified CE認證 The furnace is ready to pass TUV (UL61010) or CSA certification at extra cost. 付費可進行TUV(UL61010)或CSA認證 | ||||
Operation instructions 操作指導 | Click to download the operating manual 點擊下載說明書
|
其他推薦產品
更多產品-
面議
-
面議
-
面議