您好, 歡迎來到化工儀器網
建議使用的流體介質是：油基介質，礦物油或者使用不會對鋁、銅、不銹鋼、聚四氟乙烯，聚碳酸酯和Ametek 阿美特克T-620H
產品簡介
詳細介紹
Ametek 阿美特克T-620H
Ametek 阿美特克T-620H
阿美特克Ametek加壓泵T-620/T-620H|阿美特克T-620H的產品介紹
描述
阿美特克T-620H液壓泵用手動可以產生zui高到344BAR的壓力；阿美特克T-620用手動可以產生zui高到206BAR的壓力, 阿美特克T-620和T-620H可以用于快速準確地檢測壓力表，變送器，傳感器和其他壓力測量儀器。
建議使用的流體介質是：油基介質，礦物油或者使用不會對鋁、銅、不銹鋼、聚四氟乙烯，聚碳酸酯和浸濕的橡膠產生腐蝕的液壓介質。不要使用溶劑或合成液體，否則會使液壓泵受到損害。
操作指南
1． 拿掉儲液容器頂端的填充塞，填充流體介質到充滿儲液容器的2/3處。蓋上并擰緊填充塞。
2． 將要校準的儀器連接在測試軟管的末端；標準壓力表與壓力測試接口連接。并將測試軟管繃緊。
注意：不要繃得太緊、不要將測試泵與高壓力源連接，以避免對測試泵和操作人員造成傷害。
3． 面向測試接口，逆時針旋轉左邊的壓力釋放閥直至*打開。
4． 捏動手柄直到流體介質明顯地處于測試軟管中。
5． 拉緊測試軟管和被測設備。
注意：軟管可能在初始狀態下被預充滿了流體介質來幫助加速液壓泵的操作。
6．繼續捏動手柄直到容器中的氣泡停止運動，然后用手順時針將壓力釋放閥擰緊。
7．捏動手柄直到大概獲得測量上想要的壓力。然后旋轉右側的壓力微調閥直到獲得準確的測試壓力。
8．在完成校準測試后，逆時針旋轉壓力釋放閥釋放壓力至0 BAR并移開被測量的設備。
9．擰緊軟管末端的塞子以防止流體漏出并存放于安全的地方。
系統 C - 液壓手泵 阿美特克T-620H | |
| This easy-to-use hand pump is specially designed for high pressure applications. The pump has a built-in reservoir, vent valve, and vernier valve for fine adjustment. The pump has a dual pressure output - one for the test object and one for the IPI indicator.
Pressure range, T-620 0 to 200 bar / 3,000 psi Pressure range, T-620H 0 to 350 bar / 5,000 psi
Ready-to-use pressure systems Ready-to-use pressure systems for the DPC-500, APC, CPC, and IPI calibrators. For all pressure systems the pump and the indicator are separate systems. Therefore a replacement of the pump does not mean that you have to send the complete system for repair. Maintenance of the instrument is also made easy. Recalibration of the unit can be performed locally with an accurate pressure reference: No need to send the unit back to the manufacturer for recalibration. If you do require a factory calibration, the pump and indicator are independent and only the indicator needs to be returned. JOFRA pressure calibrators are as standard delivered as individual indicators or as a complete calibration systems ready to use in a carrying case, including pump, hose, set of fittings, batteries, test leads, user manual, and a NIST traceable calibration certificate.
| |
此頁是美國阿美特克T-620干體爐的詳細技術參數說明，詳情請咨詢邦亞電子。
