上海今森灼熱絲試驗機KS-51B是依據GB/4706.1-2005、IEC60695-2-10-2013、GB/T5169.10-2006、GB/T5169.11-2006、 GB/T5169.12-2013、GB/T5169.13-2013《灼熱絲 / ，基本試驗方法，灼熱絲試驗裝置和通用試驗程序》和 UL 746A 、 IEC829 、DIN695 、 VDE0471 等標準規定使用無火焰起燃源程序仿真試驗項目。

Shanghai insment hot wire test machine KS-51B is based on GB/4706.1-2005, IEC60695-2-10-2013, GB/T5169.10-2006, GB/T5169.11-2006, GB/T5169.12-2013, GB/T5169.13-2013 "hot wire / wire, basic test method, test device of hot wire and general test procedures" and UL 746A, IEC829, DIN695, VDE0471 and other standards without the use of flame ignition source program simulation project.

上海今森灼熱絲試驗機KS-51B用于檢測材料和成品的耐火特性。灼熱絲自身作為火源。灼熱絲的溫度由一臺溫度控制器設置和控制。試驗過程中，溫度控制器以手動模式運行，以便在操縱變量（灼熱絲）上生成規定的電壓信號，從而避免在溫度控制器上的參比變量（熱電偶）上生成一個反饋。灼熱絲的溫度可設置為室溫至1000℃。根據IEC 60584-2標準，采用K型鎧裝熱電偶（1級）測得灼熱絲的溫度。試驗過程中，試樣以恒速11mm/s向灼熱絲移動，然后返回。30秒加熱時間是由PLC計時器控制的。采用1N大小的力，將試樣支架拉向灼熱絲。 電源為230VAC±10％（50Hz）。其它技術條件如有需要即可提供。

Shanghai insment hot wire testing machine KS-51B is used to detect the fire resistance of materials and finished products. Glow wire itself as fire source. The temperature of the hot wire is set and controlled by a temperature controller. During the test, the temperature controller run in manual mode, so that the manipulated variable (GWIT) voltage signal generated on the provisions, so as to avoid the temperature controller on the reference variable (TC) to generate a feedback. Glow wire temperature can be set to room temperature to 1000 degrees C. According to the IEC 60584-2 standard, the temperature of hot wire was measured by K type thermocouple (1). During the test, the sample moved to the hot wire at a constant speed of 11mm/s, and then returned. 30 second heating time is controlled by the PLC timer. Using the force of 1N size, pull the sample holder to the hot wire. The power supply is 230VAC + 10% (50Hz). Other technical conditions can be provided if necessary.

適用于照明設備、低壓電器、家用電器、機床電器、電機、電動工具、電子儀器、電工儀表、信息技術設備、電氣事務設備、電氣連接件和輔件等電工電子產品及其組件部件的研究、生產和質檢部門，也適用于絕緣材料、工程塑料或其它固體可燃材料行業。 

Shanghai insment hot wire test machine is suitable for KS-51B lighting equipment, low-voltage electrical appliances, household appliances, electrical tools, electric motor, electric tools, electronic instruments, electrical instruments, information technology equipment and electrical business equipment, electrical connections and accessories such as electrical and electronic products and components of the research, production and quality inspection departments, also applies to insulation materials, engineering plastics or other solid combustible materials industry.

是冷板加高檔噴涂外箱；采用PLC控制，做到全智能化控制方式，真正實現網絡化及遠程控制；可做到客戶的人性化操作界面的升級，真正達到比對結果.

Shanghai insment hot wire test machine KS-51B is cold plate with high-grade paint box; using PLC to achieve full control, inligent control, realize the network and the remote control can be achieved; user-friendly interface client upgrade, truly achieve the international comparison of the results.