北廣精儀HMYX-2000 海綿泡沫壓陷硬度測定儀中英文簡介

Product Name: sponge foam indentation hardness testing machine

產品型號:HMYX-2000 

Product type: HMYX-2000

一、制作標準： 

One, making the standard:

GB10802軟質聚氨醋泡沫塑料 

GB10802 soft polyurethane foam

GB10807-2006 軟質泡沫聚合材料壓陷性能測試標準

GB10807-2006 soft foam polymeric material indentation testing standards

二、別稱：

Two, the:

聚氨酯拉伸強度試驗機、聚氨酯拉力試驗機、聚氨酯拉力測試儀、軟質泡沫海綿拉伸試驗機、軟質泡沫海綿拉力試驗機、軟質泡沫海綿拉力測試儀、汽車海綿座椅壓縮試驗機、汽車座椅壓縮/壓陷硬度測試儀、軟質泡沫聚合物壓陷硬度測試儀、海綿壓陷硬度試驗機、海綿拉伸試驗機、海綿壓陷硬度測試儀、聚氨酯拉伸及壓陷硬度測試儀、汽車座椅拉伸及壓陷硬度測試儀、軟質泡沫聚合物拉伸及壓陷硬度測試儀、

Polyurethane tensile strength testing machine, tensile testing machine, polyurethane polyurethane tension tester, soft foam sponge tensile testing machine, soft foam sponge tensile testing machine, soft foam sponge tension tester, car sponge seat compression testing machine, car seat compression / indentation hardness tester, soft foam polymer indentation hardness tester, spongy indentation hardness testing machine, tensile testing machine, sponge sponge indentation hardness tester, polyurethane tensile and indentation hardness tester, car seat tensile and indentation hardness tester, soft foam polymer tensile and indentation hardness tester,

三、主要適用于軟質泡沫聚和材料如：海綿、泡沫等壓陷硬度在國家標準要求的A法、B法、C法下對標準尺寸的海綿、泡沫等試樣進行標準的測試，測出海綿、泡沫等材料的壓陷硬度。本儀器采用計算機控制，可對試驗過程中的各種數據進行快速、準確的采集、處理，并可存取、顯示、打印，精準的曲線力值雙向顯示更直觀的顯示式樣的測試結果

Three, mainly is suitable for the soft foam polymer materials such as: sponge, foam collapsed hardness in isobaric A method, B method, C method of national standard requirements of sponge, foam sample to standard size standard test, measure the sponge, foam materials such as indentation hardness. The instrument is controlled by computer, can be fast, accurate acquisition, processing of various kinds of data in the testing process, and can access, display, print, curve precision values bidirectional display test results more intuitive.

四、 特點：

Four, characteristics:

☆ 壓陷量預先設定,通過計時電路精確控制壓陷量; ☆ 使用方便：采用高精度壓力傳感器和大規模集成電路； 

☆ sag is set in advance, through the timing circuit for accuray controlling the subsidence quantity; ☆ convenient use: high precision of the pressure sensor and the large scale integrated circuit;

☆ 測定精確：提供三種測定壓陷硬度的方法； ☆ 壓頭運行平穩,其速度為100mm/min； 

Accurate determination of ☆: provide three methods for determination of indentation hardness; ☆ pressure head runs smoothly, the speed of 100mm/min;

☆ 壓陷硬度測定范圍:0-2000 N ☆ 測力zui小分辨率:0.2 N 

☆ indentation hardness measurement range: 0-2000 N force minimum resolution: 0.2 N

☆ 測定誤差:<1

☆ measurement error: <1

五、技術參數：

Five, technical parameters:

（1）、速度：100mm/min； 

（1）, speed: 100mm/min;

（2）、壓陷硬度測定范圍:0-2000.0 N

（2）, indentation hardness measurement range: 0-2000.0 N

（3）、測力zui小分辨率:0.25 N 

（3）, the force resolution: 0.25 N

（4）、測定誤差:<1%

（4）, error: <1%

六、標準配置：

Six, the standard configuration:

1、 測試主機一臺 

1, a test mainframe

2、壓盤一支 

2, the pressure plate a

3、傳感器一支（200公斤輪輻式）

3, a sensor support （200 kg spoke type）

4、 計算機控制卡一塊 

4, the computer control card of a piece of

5、彩色噴墨打印機一臺 

5, color inkjet printer

6、計算機一套

6, the computer a

七、功能特點：

Seven, function characteristics:

☆ 自動清零：計算機接到試驗開始指令后，系統自動清零。 

☆ automatic reset: the computer is connected to the start of the experiment instruction, automatic reset system.

☆ 自動返程：試樣斷裂后，自動返回初始位置。

☆ automatic return: fracture of the specimen, automatically return to the initial position.

☆ 自動換檔：根據負荷的大小，可切換不同的檔位，確保測量精度。 

☆ automatic shift: according to the size of the load, can switch different gear, ensuring measurement accuracy.

☆ 改變速度：本機可根據不同的試樣，任意改變?cè)囼?yàn)速度。

☆ change speed: This machine according to different samples, arbitrarily change the test speed.

☆ 示值校驗：系統可實現力值的準確標定。 

☆ indication calibration: calibration system can realize the value of the.

☆ 控制方法：根據試驗需要可選擇試驗力、試驗速度、位移、應變等試驗方法。

☆ control method: according to the testing requirements can test methods test force, velocity, displacement, strain test.

☆ 一機多用：配備不同規格的傳感器，可實現一機多用。 

A multi-purpose machine: sensors with different specifications, can realize the use of a machine.

☆ 曲線遍歷：試驗完成后，可用鼠標任意找出試驗曲線逐點的力值和變形數據并分析。

☆ curve traversal: after completion of the test, the mouse can be used to find out the test curve of arbitrary point of the stress and deformation data and analysis.

☆ 顯示：數據和曲線試驗過程動態顯示。 

☆ display: dynamic data and test curve display.

☆ 結果：試驗結果可存取，對數據曲線進行分析。

☆ results: test results can access, analyze the data curve.

☆ 限位：具有程控和機械限位。 

☆ limit: with programmed and mechanical limit.

☆ 過載：當負荷超過額定值時自動停機。

☆ overload: stop automatically when the load exceeds the rated value.